So,Ya need ta make up a few of those switch's just in case someone ya know wants to get one !!
Looks like ya got it dead on bro
Hello ( djivosionfl )
Yes stock controller, or any dji controller. It is easy to do, requires soldering, I did mine in about 1/2 hour. You first have to get these items.
10k resisters ( 2 ) note must be matched pair, you'll need a multi-meter to check resistance! Find 2 alike, and recheck after soldering, as the values can change.
1 dpdt ( double pole double throw ) on-off micro or mini switch ( 6 pin )
Small wire ( yellow, & black )
Solder
Shrink wrap ( 1/8" ) yellow, black
Drill bit ( whatever size your switch is? )
Here is the best video I could find on it:
[youtube]
J Dot
Didn't take pictures cause ya sneaky like your cat avatarSweet,
Did you get shrink tube, and wire?
I used an ( on-off ) sticker from my P2v Tx sticker set, looks nice!
If they are not matched set, won't hurt nothing, but it will spin faster one direction, and slower the other!
I found the POINTY TIP ( sucks for soldering these types of connections ) I use the FLAT TIP ( looks like a flat screwdriver tip ) works really well, and minimizes heat, as you don't have to hold it on very long!
There is also a SLOW PITCH mod for the dial wheel Tx, to slow camera motion ( up-down ) I have a China CNC Gimbal, but I tweaked the pitch in SIMPLEBGC software ( Alexmos ), so I decided NOT to do that mod, but very similar to yaw mod! You cut the ( RED/BLACK ) wires from dial wheel, and use ( 2k resistors, NOT 10k ).
I built the switch, but not going to use it!
Good luck my friend,
TAKE PICTURES of your mod, for others to view and learn, ( if you can ) I did not, don't know why? I usually do, got in a hurry I guess!
Take care, Fly safe!
J Dot
Sweet,
Did you get shrink tube, and wire?
I used an ( on-off ) sticker from my P2v Tx sticker set, looks nice!
If they are not matched set, won't hurt nothing, but it will spin faster one direction, and slower the other!
I found the POINTY TIP ( sucks for soldering these types of connections ) I use the FLAT TIP ( looks like a flat screwdriver tip ) works really well, and minimizes heat, as you don't have to hold it on very long!
There is also a SLOW PITCH mod for the dial wheel Tx, to slow camera motion ( up-down ) I have a China CNC Gimbal, but I tweaked the pitch in SIMPLEBGC software ( Alexmos ), so I decided NOT to do that mod, but very similar to yaw mod! You cut the ( RED/BLACK ) wires from dial wheel, and use ( 2k resistors, NOT 10k ).
I built the switch, but not going to use it!
Good luck my friend,
TAKE PICTURES of your mod, for others to view and learn, ( if you can ) I did not, don't know why? I usually do, got in a hurry I guess!
Take care, Fly safe!
J Dot
Hi J Dot,
Here we goooooo
View attachment 19100
I already had the heat shrink & wires, one black, one orange.... Well it's almost yellow but that will dooooo just been checking the tolerance on the resistors, fingers X I'll have a matched pair.
My solder tip is the pointy micro one but that's what I'm use toooooooo so I'll be fine with that.
I'll give the camera pitch mod a miss for now, not got the new TX so will have to keep on using the slider on the FPV screen.
I'll keep you posted how I get on, I'll have more time this weekend
Is your switch ( on-off ) or ( on-off-on )? Mine are ( on-off ), 1 click one way, one click the other! Just checking!
J Dot
We use essential cookies to make this site work, and optional cookies to enhance your experience.