Show off your Cases!!

[Martin Smith]

View attachment 43596
Here's our P3A in a P2 case I've modded. As a case, it's great but, on the other hand, the locks are utterly hopeless some I hope I can source some much stronger units to replace them. Because it was for an old model, I got it for half the original RRP, so all-in-all, I'm very happy..

This is a nice looking setup and layout, especially where you have the tablet.

 

[Dave from Ok]

My case $15.00 from Goodwill.

Sent from my iPad using PhantomPilots mobile app

 

[Numone]

This is a nice looking setup and layout, especially where you have the tablet.

Thanks Martin. The Air is in the original space where the P2 transmitter was to go.

 

[Mannsp3a]

I seen many threads for people asking about what cases to get, yada yada yada.

However I did not see a dedicated thread showing your case setup!! Which I feel would be a good stop for new/old users who are looking to gather ideas of finished cases.

Mine is a case from MCM Electronics. The 22" weatherproof case.
22" Black Tactical Weatherproof Equipment Case | 22-24120 (2224120) | Distributed By MCM

I chose this case over others because of it's cost and build quality. I'm very happy with the outcome and setup. Everything fits perfectly and looks good.


(I forgot to label the top layer only has a cutout for a battery if installed on the phantom. So the case could carry a total of 3 with ease.Maybe two more off to the right in the "spare room.." section)

Where did you buy the computer deck in the background? Looks pretty neat

 

[dgd3]

View attachment 43596
Here's our P3A in a P2 case I've modded. As a case, it's great but, on the other hand, the locks are utterly hopeless so I hope I can source some much stronger units to replace them. Because it was for an old model, I got it for half the original RRP, so all-in-all, I'm very happy..

Where did you get the case?
I don't take off my prop guards.

 

[Numone]

Where did you get the case?
I don't take off my prop guards.

I got it from Camera Jungle in the UK. I traded-in a Nikon 18-200 DX MKI VR lens I bought tax free in HK 9 years ago for £400 and I got the case, a 100 watt DJI Charger and £53 in change..

 

[redonk]

IMG_20160211_222720449_HDR-01

• redonk
• Feb 11, 2016

Modified DJI Hardshell:

-radio
-bird
-batteries
-props
-clamshell windsurfer
-taco rc mc filters
-charger
-neck strap, cables, misc
-nexus 7 2013

 

[Shaba]

I actually store the RC with the antennas down. The metal "leg" on the RC stops the antennas from reaching the bottom of the case. That way they are out of the way and I can just run the strap over the RC.

I do the same thing

 

[rpratali]

Purchased a Nanuk 950 rolling case. Very nice design, plenty of room for accessories. Includes foam inserts to keep the props properly aligned. Really like the included foam block that protects the gible / camera. I had to slightly modify the inside to allow the prop guard connectors (mounted directly to the drone arms) to fit properly. Also added a cool decal to the lid.

 

[bryan0026]

Here's my version with a P3P that I picked up the other day and couldn't be happier! It's the Ferrari of mobile charging stations that allows you to charge in the field (via car) and at home. One of a kind. Charges an iPad, 3 batteries, and controller all in 35-40 minutes. Has plenty of storage for accessories. Everything is hidden underneath. Has rollers with handle. Best part is as you can see is the fact that you don't have to take the prop guards off.

 

[Numone]

Here's my version with a P3P that I picked up the other day and couldn't be happier! It's the Ferrari of mobile charging stations that allows you to charge in the field (via car) and at home. One of a kind. Charges an iPad, 3 batteries, and controller all in 35-40 minutes. Has plenty of storage for accessories. Everything is hidden underneath. Has rollers with handle. Best part is as you can see is the fact that you don't have to take the prop guards off.

Now THAT is some case!!!

 

[dtitus6297]

That is one heck of a case...looks heavy tho..lol

Sent from my SM-G900V using Tapatalk

 

[Cheify]

Made mine, was looking for a backpack that didn't advertise what was in it. but the ones I found online were over $300 AUD.
still looks a bit like a blocky camera bag.

backpack was $100Aud
foam $20
felt $10
glue $10

Only have one battery at the moment. could cut extra slots for extra battery's, but will probably just put them in one of the other bag compartments. Even room for a water bottle on the sides when hiking.



Sent from my iPad using PhantomPilots mobile app

 

[narli]

Here's my version with a P3P that I picked up the other day and couldn't be happier! It's the Ferrari of mobile charging stations that allows you to charge in the field (via car) and at home. One of a kind. Charges an iPad, 3 batteries, and controller all in 35-40 minutes. Has plenty of storage for accessories. Everything is hidden underneath. Has rollers with handle. Best part is as you can see is the fact that you don't have to take the prop guards off.

 

[narli]

bryan ok so give it up what case is it ,, what did it start at ,,??

 

[RedHotPoker]

Suspense, much like a Hitchcock thriller... A real Nail Biter. Hahaha
Show us the hampster cage with the 'wheel', turbine generator.. ;-)

RedHotPoker

 

[ryanmanchester]

Sent from my iPhone using PhantomPilots mobile app

 

[Mitch40]

Okay Ryan...how did you fit the dbs mod antenna in there? Is that a P3S? Or Adv/pro?

 

[Mitch40]

Sent from my iPhone using PhantomPilots mobile app

Sorry for same post. Couldn't connect to server.. Ryan please read above

 

[RyanW]

Procraft case off Amazon, I love this case. I need to get some more batteries. I've had my P3A for about a month now