MacMan said:I didn't mention in my previous post that the RS works fine. No delay in movement in either direction. The momentary delay is ok, it's just that I would like to shorten it by a few seconds. I'm thinking that the "SC" switch is somehow programmed to have the momentary delay before the camera begins to tilt. I may be wrong though. I will try a recalibration of X1 and be sure that I have SC in the middle. Thanks for the input.
The only time it will delay is if the combination of RS and SC is "out of range". SC and RS are tied together to feed X1. In the middle, they're both at 0. But they both have full sweep, so when one is up and the other is up, they're twice the distance that X1 supports. If both are up and you click SC down, it will take time before the combined output to X1 comes into range causing the gimbal to move.