power on self test

[steadicamhawaii]

my phantom is blinking red green yellow and in the manual it says "power on self test" but doesn't tell you how or what to do afterwards

 

[Buk]

my phantom is blinking red green yellow and in the manual it says "power on self test" but doesn't tell you how or what to do afterwards

Please tell us a bit more about your Phantom, what model is it?, right out of the box or have you used the Assistant software?

 

[OI Photography]

Check the bottom of page 15: http://download.dji-innovations.com/dow ... 1.7_en.pdf

You'll see that continual red-green-yellow flashing means that there is abnormal IMU data, you'll need to connect the Phantom to the Assistant software and calibrate your IMU and compass there.

 

[Deleted member 954]

Same problem here after downloading 3.0 Assistant and upgrading firmware to 3.04. (Phantom 2)
Data through fpv shows normal gps and iosd mini-data. 7 sats etc.
Do the radio also need to be upgraded?
Problem started when I wanted to install ground station. (Plugged air end of ground station can-bus through Iosd-mini)
Anyone?
-stu - Norway