Possible to build range extender into the transmitter?
- Thread starter Vleestoeter
- Start date
dirkclod
Premium Pilot
I have Mark and it wouldn't bind when I tried and just didn't try to go any farther with it .
Well I tried with my Vision anyway .
i think those are fine, as long as the antenna is 2.4 i think ur fineHi,
I`m thinking to do same mod like U, so I`m wainting for full effect of your mod!
What to do uthink about this antenna ?
2.4G/5.8G 8DB Wifi Wireless Omnidirectional High Gain Antenna Bore White best
Personally, I think it's a mistake to replace patch antennas with omnis unless you have no interest in range.Hi,
I`m thinking to do same mod like U, so I`m wainting for full effect of your mod
What to do uthink about this antenna ?
2.4G/5.8G 8DB Wifi Wireless Omnidirectional High Gain Antenna Bore White best
So u think it make no sense to replace them with this antennas? I was hoping to improve range 2.4 and 5.8 with them.. becasue they are dualband.. any cheap alternative? on stock with R700 I have max 300m range :/
If you want to improve range, I'd spend some money and go with the original ITELITE. Why? Because they are good directional antennas which allow you to aim - and therefore force the energy from your transmitters in one direction.
captainmilehigh
Premium Pilot
Looking forward to your test results. Hope it works better than planned. Good luck!
Sent from my iPad using PhantomPilots
Sent from my iPad using PhantomPilots
- Joined
- Jun 6, 2016
- Messages
- 72
- Reaction score
- 16
- Age
- 38
I just was going to start a topic on the p3 standard remote working with the p2v+and noticed I wasn't the only one the wanted to get rid of that external repeater well I put this together last night and tested it today!! It works just fine!!!.. I added the other battery from range extender in series tied into the main switch on the remote to send power to the repeater, the only thing that was a little bit of a pain was that I had to take the remote apart to bind it to the bird(reset button)[emoji849]!!
Sent from my iPhone using PhantomPilots mobile app
Sent from my iPhone using PhantomPilots mobile app
dirkclod
Premium Pilot
- Joined
- Jun 6, 2016
- Messages
- 72
- Reaction score
- 16
- Age
- 38
Same to you!! I think it's going to get the itelite antenna to finish it off.. If your interested there's a p3s with the the itelite mod on eBay with 5 days on it.. Buy it now is $150 it's real tempting just so I can tinker with that remote, plus there should be a way to make it work!!
Sent from my iPhone using PhantomPilots mobile app
Sent from my iPhone using PhantomPilots mobile app
dirkclod
Premium Pilot
I'm sure there's a way I just don't have the time to tinker with it now . I have the itelite on all 3 of my Tx's and love em .
Now the TX I wish I could bind is my P3 4K to my Standard . The camera buttons are slick . I tried that but had no luck
ether .
I can see ya now when you thought about binding it . Been there
Now the TX I wish I could bind is my P3 4K to my Standard . The camera buttons are slick . I tried that but had no luck
ether .
I can see ya now when you thought about binding it . Been there
Would like to do this but I have the TX charger socket at the bottom of the TX so would mean putting it elsewhere
Sent from my iPhone using PhantomPilots mobile app
Sent from my iPhone using PhantomPilots mobile app
Similar threads
