- Joined
- Jan 9, 2016
- Messages
- 290
- Reaction score
- 33
I just received my Polar Pro 6 filter pack...I have a question about the PL filters, the PL, the ND8/PL and the ND16/PL...do they need to be screwed on in a certain way, like an ND grad would on a camera lens? When I hold them up to the light, I can't see any variation in light/dark in the glass...normally the darker area would be at the top of the filter to darken skies and leave the ground unaffected...but I can't detect any differentiation in these.
For those of you who own these, do you just screw them on or do you somehow have to check for light/dark areas to make sure the dark part of the filter is at the top of the lens, and if so, how do you do this, do you have to power up your Phantom and check the camera view with the Go app?
Thanks,
Tamara
For those of you who own these, do you just screw them on or do you somehow have to check for light/dark areas to make sure the dark part of the filter is at the top of the lens, and if so, how do you do this, do you have to power up your Phantom and check the camera view with the Go app?
Thanks,
Tamara