- Joined
- Apr 2, 2018
- Messages
- 17
- Reaction score
- 1
- Age
- 51
Hello fellow pilots, I hope this finds you all very well.
Really appreciate if some of you more experience pilots, who can read an aircraft flight log, can help me understand what may have occurred during a flight today
I was flying Phantom 4 Pro V2.0 with Crystalsky Ultra, at an altitude of 230m, 120m away and received "Weak Signal adjust antenna..." pop up. Antenna where parallel to each other and in the 60 degree position pointing to aircraft. Crystalsky reported "Aircraft Disconnected" and locked up the display which went from colour to black and white, I dropped altitude to bring the aircraft closer, however it did not reconnect, I rebooted the Go 4 app, no joy reconnecting to aircraft, and then rebooted the Crystalsky and relaunched Go 4, but still no reconnect.
The aircraft didn't go into return to home mode, which was surprising, however with time to think, I assume this was because the controller was still connected to the aircraft. I was in VLOS and could land the aircraft ok.
Go 4 flight log only goes as far as the point of disconnect. DJI Assistant is not yet working very well getting the aircraft flight logs from the P4P V2.0 but I found some workarounds and managed to get the aircraft flight logs off P4PV2.0. That said, I am not very experienced yet at reading the data and telemetry.
I extracted the 2 last 2 flight logs from DJI Assistant, and have them uploaded to dropbox, here are the links:
Dropbox - FLY075.DAT
Dropbox - FLY076.DAT
If any of you could be so kind as to take a moment to review the logs, and see anything jumps out, I would be eternally grateful. I'm trying to see if the problem was the pilot, the aircraft, the Crystalsky, or Go 4 locking up.
Really appreciate if some of you more experience pilots, who can read an aircraft flight log, can help me understand what may have occurred during a flight today
I was flying Phantom 4 Pro V2.0 with Crystalsky Ultra, at an altitude of 230m, 120m away and received "Weak Signal adjust antenna..." pop up. Antenna where parallel to each other and in the 60 degree position pointing to aircraft. Crystalsky reported "Aircraft Disconnected" and locked up the display which went from colour to black and white, I dropped altitude to bring the aircraft closer, however it did not reconnect, I rebooted the Go 4 app, no joy reconnecting to aircraft, and then rebooted the Crystalsky and relaunched Go 4, but still no reconnect.
The aircraft didn't go into return to home mode, which was surprising, however with time to think, I assume this was because the controller was still connected to the aircraft. I was in VLOS and could land the aircraft ok.
Go 4 flight log only goes as far as the point of disconnect. DJI Assistant is not yet working very well getting the aircraft flight logs from the P4P V2.0 but I found some workarounds and managed to get the aircraft flight logs off P4PV2.0. That said, I am not very experienced yet at reading the data and telemetry.
I extracted the 2 last 2 flight logs from DJI Assistant, and have them uploaded to dropbox, here are the links:
Dropbox - FLY075.DAT
Dropbox - FLY076.DAT
If any of you could be so kind as to take a moment to review the logs, and see anything jumps out, I would be eternally grateful. I'm trying to see if the problem was the pilot, the aircraft, the Crystalsky, or Go 4 locking up.
Last edited: