Hello phantom pilots, i am new here. I would like to ask someone for some help regarding my P3P. I crashed my drone two weeks ago so i tried to repair it, as i saw that it is losing video feed i immediately ordered a spare flexi cable on amazon for replacement, i have had an experience before replacing flexi cable, since i bought this drone used and had a broken gimbal. I thought i could fix it again because i had fixed it once and had no issues before, but when i put it all back together with extra care, i noticed that somethings wrong. It wont align. I tried watching all i could find on youtube regarding this problem but nothing works. Also i noticed that the gimbal gets hot when testing if the alignment i did to the gimbal is working. I am getting frustrated because summer is here and my drone is not working. I do have another drone, a P34k. And also want to ask if i can use the camera/gimbal to replace the P3P camera/gimbal. Thanks for all the help guys! God bless everyone!
GIMBAL WONT ALIGN AFTER CHANGING GIMBAL FLEXI CABLE. PLEASE HELP!
- Thread starter irvsky
- Start date
- Joined
- Nov 16, 2015
- Messages
- 876
- Reaction score
- 337
- Age
- 65
Remove the 5 screws at the back of the gimbal and adjust the axis shaft in the board so that the indent is parallel to the camera.
Thanks for the quick response Alan! But i already did that. But for some reason i just could not level it. It still wont level. I have watched lots of videos on youtube but it still is not leveling. I cannot understand why? I dont know if theres a problem with the motor? But if i buy a new one i dont know if i can level it either... any other options or maybe some photos on how it should look like. Thanks a lot!
Similar threads
