So I just brought my phantom three out of retirement to see how she runs. I took the gimbal flat cable and replaced it but now it won’t respond.
Gimbal unresponsive
- Thread starter christian w
- Start date
BTW the lights on the main gimbal board and the camera are both green so not sure if it’s a connection problem or not.
Hi have to ask was other ribbon damaged ? Have you had a look in tranmission settings,any difference with sd card out when on
Just from some posts in the past some ribbons can be bit not right,few sorts on the market,some just dont work,only way to eliminate bad ribbon is to put your other back ,was it ok or have same issue before,,camera move up and down ok,,when turning on try wait 20secs then conect,i post this but thinking still
Done bit of a search on google,yip few cables around,,if its a dji or fstop brand ribbon it should work,some on ebay not to good,some posts did mention some slide in and some have release clip just to make sure it clips back down,unsure myself on what to try before i would dismantle again
,,if you on latest playstore update you could try reinstall djigo and see what happens,,got green lights there so cam should have power
,,if you on latest playstore update you could try reinstall djigo and see what happens,,got green lights there so cam should have power
