Gimbal Clamp (Part 84) Does it fit the PRO model?

[Swedflyer]

Ordered a gimbal clamp to my P3 PRO from Hobbyking.

Link: DJI Phantom 3 - Gimbal Clamp (Pro/Adv)

Description says " DJI Phantom 3 - Gimbal Clamp (Pro/Adv) "

I got Part No 84 and when i search for it the descriptions says it´s for the "Standard"

I have tried it on my PRO and it seems to fit but there is a very "Tight" fit so im not sure if im gonna use it.

Anyone who nows if there is any difference between this and the "Part 44" that should be for the ADV/PRO?

 

[msinger]

I got Part No 84 and when i search for it the descriptions says it´s for the "Standard"

Right, it'll only fit the P3S. You need part 44.

 

[Swedflyer]

Right, it'll only fit the P3S. You need part 44.

Ok when i compare pictures of part 84 and part 44 the only difference is 4 very small tabs ( i have marked them on the picture)
And its because of them the fit is a little tight or else it seems to fit perfectly.

 

[msinger]

You could sand off those tabs? That's what I did with my lock. It goes on and off a lot easier now.

 

[Swedflyer]

You could sand off those tabs? That's what I did with my lock. It goes on and off a lot easier now.

Ok thanks for the tip
Are u using the clamp for your Pro or Standard?

 

[msinger]

I'm using the correct clamp on both my Pro and Standard.

I just tried attaching my Standard clamp to my Pro and it was way too tight for my liking. The part 44 clamp slides right on.

 

[Swedflyer]

I'm using the correct clamp on both my Pro and Standard.

I just tried attaching my Standard clamp to my Pro and it was way too tight for my liking. The part 44 clamp slides right on.

Ok then im gonna order Part 44 clamp.
Thanks for the help!