Has anyone experienced any thing different about their connection to the Flytrex Live servers to display their Active Flight page? When I originally installed my FL3G, I connected it to the 12v output side of a step-down regulator instead of the 6S input side. This was of course not a problem for the FL3G as it's spec'd for 3S-6S input. However, it means I'm logging the output from my regulator and not the voltage of my flight battery. I didn't feel like undressing the wiring right then so I didn't worry about it. I made the first flight and everything worked fine. During this whole time, whenever my flight battery was connected and the FL3G had its flashing green light, if I opened up Chrome and went to my Live Flight Page, I saw the live flight screen with data and the GPS plot on the map. This was true even if I had not started the motors, but was just powered on.
Today I connected the FL3G to have 6S input power so my logging would accurately reflect my flight battery voltages. That was the only thing I changed. Now, with power on and a flashing green LED on the FL3G, if I open Chrome and go directly to my Live Flight Page, it shows "CONNECTING", then changes to "NO LIVE FLIGHT AT THE MOMENT". However, without powering off or changing a thing, if I login to my Flytrex account and go to my profile screen, the Live Flight button directly under my profile picture is green, and indicates an active live flight. If I click that button, I go to my Live Flight page, and everything is normal... flight data and active GPS plot displayed on the map. So, I know the live flight is being received normally from the FL3G, but accessing it from outside my Flytrex account appears impossible (tried from two other computer sorces as well).
Wondering if there are server issues happening right now? Anyone else see anything like this? I just can't see going from 3S input to 6S input being able to cause something like this.