- Joined
- Mar 8, 2016
- Messages
- 19
- Reaction score
- 5
I had the same situation but, after re-booting the RC and the Phantom, I got the prompt to update the aircraft and the rest went smoothly. I used the app on an iPad.
To resolve this turn off the aircraft then, with the RC on and connected to your iPad in the DJI Go app home page press and hold the cap in the upper right corner for 5 seconds at least. Then you will have the option of downgrading the RC back to its previous version. The RC should not have been updated before the aircraft which is what caused this problem. Select the prior version and install. This will fix the signal lost problem. You will be back to square one with neither aircraft nor RC updated but you'll be flying again like you were before. Hopefully this will all get fixed soon and we can smoothly update as I have done every time in the past.I have also updated the RC and now have the RC Signal Lost message and it doesn't give the update Aircraft message. Trying it using the Go App on Ipad, any fixes for this?
I updated my P4 RC firmware to the current available then got the same error about no connection. I attempted to upgrade the bird thru both the Go app and Win 7 Assistant, but it kept failing. I then downgraded the RC firmware back to the previous version and finally was able to connect to the bird again.
Problem now is the camera will go on then off then on then stay off. Red No Connection msg. I can fly no problem but camera wont work now. No idea what to do now.
Problem occurs on both iphone 6 and ipad mini 2.
Would reformatting the SD card make any difference?
Any feedback / comments certainly welcome.
THANK YOUTo resolve this turn off the aircraft then, with the RC on and connected to your iPad in the DJI Go app home page press and hold the cap in the upper right corner for 5 seconds at least. Then you will have the option of downgrading the RC back to its previous version. The RC should not have been updated before the aircraft which is what caused this problem. Select the prior version and install. This will fix the signal lost problem. You will be back to square one with neither aircraft nor RC updated but you'll be flying again like you were before. Hopefully this will all get fixed soon and we can smoothly update as I have done every time in the past.
What your saying makes a lot of since. Things went wrong with the firmware upgrade when I used my iPad mini 3 with the current Go app. but installed right when I used my android tablet (Nvidia Shield) with the updated Go app.Maybe. I
Maybe, I'm running Go on IOS but as you know there's no IOS upgrade for DJI Go at present. It was after the P4 upgrade through the PC that I connected the RC to my IOS device and opened the DJI Go app it immediately told me the RC was due an update. Main thing is you're back in business!