I just crashed my new p3 adv against a tree and then it fell upside down on pavement. I would say it was about 15 ft high. I removed all the props and checked it out and then i turned it on, and all the motors still work. But when i put the props on and turn the motors on, one of the props keeps on hitting the frame because it's bent pretty bad. And also the camera fell off with the gimbal but since it fell upside down i'm pretty sure the camera/gimbal still works. The yaw arm broke off the phantom and the ribben cable snapped.
Potential cost:
1x New motor (if needed) 20,-
New frame/shell 60,-
Ribben cable 45,-
Camera/gimbal (probably not needed) 320,-
Potential cost:
1x New motor (if needed) 20,-
New frame/shell 60,-
Ribben cable 45,-
Camera/gimbal (probably not needed) 320,-
Attachments
-
IMG_1836.JPG295.5 KB · Views: 435
-
IMG_1837.JPG282.8 KB · Views: 433
-
IMG_1838.JPG270.8 KB · Views: 445
-
IMG_1839.JPG302.9 KB · Views: 489
-
IMG_1840.JPG299.8 KB · Views: 473
-
IMG_1841.JPG244.2 KB · Views: 478
-
IMG_1842.JPG361.7 KB · Views: 475
-
IMG_1850.JPG339.6 KB · Views: 476
-
IMG_1851.JPG286.6 KB · Views: 473
-
IMG_1852.JPG278 KB · Views: 407