I either accidentally incorrectly installed the power for my avl58 vtx and may have shorted the power out. When I opened the body I smelt a little burn and some black was visible on the video and power output ribbon wire. On the main board. I checked and all was still fine with my phantom flies fine . I soldered another better wire to get power for the vtx. Anyway is this wrong ? Should the ic that is burnt at the power out be replaced ? Should I worry as everything else is fine.
My stock phantom2 charger blinks red and green and does not charge the battery. :?: can it be fixed easily?
Also I no longer use my stock charger instead use my lipo charger and cut of the pin and soldered to the output. I noticed my batteries only charge to about 90% when I connected to the PC to see the voltage. Any idea why? I use 4000mah output on my lipo charger. http://www.ev-peak.com/AK610AC.html
My stock phantom2 charger blinks red and green and does not charge the battery. :?: can it be fixed easily?
Also I no longer use my stock charger instead use my lipo charger and cut of the pin and soldered to the output. I noticed my batteries only charge to about 90% when I connected to the PC to see the voltage. Any idea why? I use 4000mah output on my lipo charger. http://www.ev-peak.com/AK610AC.html