Recent content by ultimatetetoyman

Anyone have any problems using phantom 4 knockoff batteries

Hi, i purchased a type c to HDMI /USB/ Type c port from amazon., The type c is for android phones and plugs into the charging part of the phone. You plug the type c into the phone, then the HDMI goes to monitor and the usb goes to controller,. This only works with certain phones and tablets...

Hi, thanks for the info, yes now i remember reading about this , the thing that got me going was method two but when i do it it seemed to shut off very fast almost even before i hit the bottom of the stroke, . but im sure it is working as it should now with this info

Hi thanks for the reply, i sure hope so, it scared me when i was testing it yesterday and i noticed it just shut off completely when i lowered the left stick. It been a while since i flew and when i started it up inside everything worked great then i noticed the auto shutdown on lowering the...

I have not flown the drone for a bit, and i decided to try it out, But while testing it indoors, i found that i start the drone by pulling down and inward with both sticks, then the drone starts ups etc. but if i pull down on the left stick and pull to the bottom limit the drone shuts off...

I have a monitor that i would like to use on the phantom 4 prov 2.0 , Do i need to put a USB/HDMI port board on the controller. Apparently the phantom 4 pro usb/hdmi port board does not work with the v2.0 controller. Does anyone know if this is true, and if so can i get an HDMI board for the...

dont worry about the lights on the drone until you bind the controller to drone, red lights are ok and the yellow light mean magnetic interference so make sure you are not near metal , first bind the controller to the drone.

also i heard that upgrading the firmware is the problem and some say to downgrade back older firmware fixes problem, but i have not got to that as of yet, will be trying as soon as i can figure it out

I have two p3ps that will not connect to app and video, both will start the motors and actual fly but no video nor app support. Still working on trying to download firmware . Both drones do the same thing and i changwed controllers and changed the usb circuit and new cables and tablet etc, tried...

Hi yes it's frustrating I'm 70 and when it comes to this tech stuff I struggle. But I just received a new usb circuit board I ordered and I'm going to put it in tonight .if it does not connect I think I will just take it out for a one way flight to wherever it goes

im not sure if i updated it a while back, but is there a way i can down grade to an earlier version and see what happens. it appears the controller just will not connect to app.

Thanks, yes t sat for two years, and all i get is can start the motors ans control the drone, but no camera or anything else regardng the app

My Phantom 3 pro sat for some time , i decided to fire it up again. but i cannot get it to connect to the app. I checked the USB board and its ok, i tried it with Litchi and dji go but no luck. Aslo turned off debugging on tabley/phone. Tried several new connecting usb cables. Tried resetting...

Hi yes I was out flying yesterday and it happened again. The battery showed o in red and the voice came on then it said loss of signal .when it happens it makes it appear that there is a loss of battery first before it shows loss of signal. The first time it happened I thought the battery fell...

ok great i will try that