Recent content by paulie737

Hi Mako, To answer your questions. I have opened up the P2 and checked the wiring against other pictures of internal P2V+ wiring. All normal. I did the same with the controller. All normal. Not modified in any way. This P2 had been previously crashed at least twice and cannot contact the...

Thanks Mori. Once I get this thing back together I will try that. p

J did what you suggested with RC assistant paying particular attention to A,E,T,R channels responding to stick input. Everything is correct. ...but the drone responds differently. Time to open the drone and see if I can find a crossed connection. Posted my query on P2V+ for a pic per your...

I'm looking for some clear pictures of cable connections inside your P2V+. I'm repairing a drone for a company that crashed it several times. A prior repair replaced the plastic body and it was crashed again. I know the body was replaced as there is not a serial number sticker on the bottom...

Thanks

Thanks J. I'm thinking I may have thrown myself off here and in doing so, all of you with my post. I got to thinking that it was the drone that crashed numerous times before I had the chance to try and repair it, NOT the Tx. Don't have contact with the guy that did the previous repair so I...

Here are some pictures of Tx internals. The S1/S2 switch wiring/board connector bundle is disconnected for clarity. Zooming in you can see that the wiring bundle/connector for each stick includes all the wiring from both pots to the board for both sides. In other words, bundles isolated to...

Thought of that and switched to mode 1 and the channels still crossed.

Re Compass: Mod value is about 1200 as I remember. I was within range. I'll recheck connections yet again. Re Crossed sticks: I believe it should be as you posted above and is as it is presented in DJI manual (pitch and roll in one stick). But it is presented differently in the RC...

Hi guys, Reposted this from the P2V+ Discussion area since I hadn't received any replies. Here's the issue. Regardless of mode the RC controller is in (Mode 2 default), the "flying stick" (pitch and roll) is crossed with the throttle/yaw stick...meaning...one stick is pitch and yaw and the...

Hi guys, Here's the issue. Regardless of mode the RC controller is in (Mode 2 default), the "flying stick" (pitch and roll) is crossed with the throttle/yaw stick...meaning...one stick is pitch and yaw and the other is roll and throttle. Needless to say this is an incredibly difficult bird...

Dave I finally got mine to calibrate in the vertical by going out in my field. Powered everything up, and set the remote and iPhone about 25 feet away. When I did the vertical I got a green. Also locked up quickly to 6 sats. Before I was doing it in the house with no success. p

No not windy. Doing ground tests with no props. ESC going bad?

Hi. A newbie here and retired old professional pilot and veteran. I would like to thank all of you for the wonderful info I have found here. Very helpful. My son's company has this drone (P2V+) that was crashed twice. They are a land development company. They have bought a second one and my...

I'm having the same problem. I have downloaded Assistant (latest version 3.8) and uploaded latest firmware. Originally started with a wrecked P2V+ from a company. The operator said the final crash was caused by a prop flying off in flight (sounds like a motor shut down and prop spun itself...