What connector is this p3s transmitter plug ???

[rabristol]

What connector is this? Its the transmitter for the Phantom 3 standard. The connector that plugs into this is broken. The battery plugs in here, anybody know where I can get a plug ????

 

[dirkclod]

What exactly is the problem..like it wont stay connected or what .
That gonna be hard to find I think .

 

[nick59349]

Is the battery end of the connector ok? It looks like the pins are still intact. If they are just plug in the battery and put some silicone sealant on it to hold it in place, it should be good. Dirk's right, finding that connector on the board is going to be tough.

 

[dirkclod]

OK..I see what you did in your other post . If you can't put the wires back in that plug from your battery then maybe you or someone you know that can solder stuff that small can fix ya up .

 

[Zerone]

If you're in the US, then HobbyWing might have what you need.

HOBBYWING North America — RC 101 - Battery & Balance Connector type

 

[dirkclod]

If you're in the US, then HobbyWing might have what you need.

HOBBYWING North America — RC 101 - Battery & Balance Connector type

That's a good place but don't see the one he's talking about . I have took mine apart several times and it is small .
If @J Dot comes on shortly he will know as he makes a lot of those type cables for his switch's and such .

Edit / I know he knows as he made me my slow mod switch and it has one of those connecters .
Just thought of that

 

[rabristol]

Thanks for all the help, I will call Hobby Wing. If they dont have it, I will get it soldered or silicone the pins in as the pins still work.

Thanks for the input.

 

[J Dot]

Here you go,

J Dot

 

[dirkclod]

Here you go,

J Dot

Is that from the battery Jerry ?

 

[J Dot]

My Bad
Here you go:

Here are the pins

J Dot

 

[dirkclod]

My Bad
Here you go:

Here are the pins

J Dot

I take that is from Digi-Key

Added / http://www.google.com/url?sa=t&rct=...LambpCSg0bgoBSC0Q&sig2=zVCF3vrkuN4T9C_UTH9b9g

 

[telescott]

Same thing happened to me. The plug is brittle. I was able to reinsert the wires into what was left of the connector from the battery and a drop of epoxy added to hold them in place.

 

[J Dot]

Don't forget,
You'll need a crimping tool for those pins. I use a ( Engineer PA-09 connector plyers )

Regular crimpers won't work.
I got these for $15 eBay.

If all else fails, and he sends me the back casing of the Tx, I'd be happy to fix it for him, as long as he pays shipping, I'll do it for free.

Just saying!


Smooth like that!
J Dot
@dirkclod

 

[dirkclod]

Don't forget,
You'll need a crimping tool for those pins. I use a ( Engineer PA-09 connector plyers )
View attachment 43908
Regular crimpers won't work.
I got these for $15 eBay.

If all else fails, and he sends me the back casing of the Tx, I'd be happy to fix it for him, as long as he pays shipping, I'll do it for free.

Just saying!


Smooth like that!
J Dot
@dirkclod

Thanks for chiming in Jerry .
I would put smiley face here but they seem to be gone .

 

[telescott]

Don't forget,
You'll need a crimping tool for those pins. I use a ( Engineer PA-09 connector plyers )
View attachment 43908
Regular crimpers won't work.
I got these for $15 eBay.

If all else fails, and he sends me the back casing of the Tx, I'd be happy to fix it for him, as long as he pays shipping, I'll do it for free.

Just saying!


Smooth like that!
J Dot
@dirkclod

He could just send the battery. There is just two screws. That is very nice of you.

 

[dirkclod]

He could just send the battery. There is just two screws. That is very nice of you.

That's J Dot bro

 

[rabristol]

Thank you everyone for your input! Jerry is going to help me out on this. What a great group of people on this forum!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!