This is a Phantom 2 that I bought new when they first came out. I still fly it today but just bought a P3P off the forum so this one has to go. It only has about 30-40 flights on it. I had 4 battery's but sold 3 of them so the one battery I am including only has about 10-15 charges on it. It originally had a V1 transmitter (included) on it but I upgraded it to the V2 transmitter.
Some of the pictures will be in a second post. It would let me upload all in a single post. The picture were taken with a old 3mp camera so it you need some better ones I can possible take some.
Here is a list of what comes with it. If I forget something you basically get everything pictured in the pictures. I want $300 for all of it plus actual shipping. I will take paypal and east the fees.
Here is what you will get:
Phantom 2 equipped with the following:
H3-3D Gimbal with extra rubber dampeners
one battery
V2 transmitter
5.8ghz video transmitter with long range antenna
Diversity Receiver with 2 long range antennas - one beam and one omni - monitor
is mounted to transmitter with GoPro mounts for easy removal. Monitor has
built in lipo battery and sun shade.
ISOD - DJI on screen display installed in the quadcopter
GoPro 3+ Silver camera with 32mb sd card and ND filter. Added a nickel to counterweight
for the filter. Balanced it great.
All extra GoPro mounts that it came with.
Wider/Taller landing gear.
Wall charger
All stickers and paperwork
EXTRAS include:
V1 Transmitter with GoPro mount for monitor
Mobile Charger
2 - regulal landing gear - one is new in package, other was the original from the P2
NIB P2 replacement shell - the shell on the P2 is fine. On a small crack on the top of the
shell by one of the motors. I though it might get bigger but it never did so I never needed to
install it. You can fly it forever like it is.
Complete set of new in package DJI props
Several extra FPV antennas I was playing with before I bought the good ones
6 - ribbon cables for the gimble to camera - you don't need these because I added the board
with the connector that plugs into the back of the camera - you can sell these.
One new in package noise board - I am not sure why I bought this since the one in the P2
works fine.
Original box for P2 and H3-3D - will increase shipping costs but I have them if you want. P2
Will not fit in the original box because of the wide/tall landing gear.
Like I said it's everything in the pictures. If you have any questions please send me a PM. I am
on here everyday. BTW this P2 has never been crashed or had any damage. I am 63 years young and have been flying RC airplanes and helicopters since i was 16 so it was a easy transition to flying quads for me.
Here is the link to the long range antennas. They are the ones that are $116.33.
Phantom 2 (non vision)
More pictures to come in a second post.
Some of the pictures will be in a second post. It would let me upload all in a single post. The picture were taken with a old 3mp camera so it you need some better ones I can possible take some.
Here is a list of what comes with it. If I forget something you basically get everything pictured in the pictures. I want $300 for all of it plus actual shipping. I will take paypal and east the fees.
Here is what you will get:
Phantom 2 equipped with the following:
H3-3D Gimbal with extra rubber dampeners
one battery
V2 transmitter
5.8ghz video transmitter with long range antenna
Diversity Receiver with 2 long range antennas - one beam and one omni - monitor
is mounted to transmitter with GoPro mounts for easy removal. Monitor has
built in lipo battery and sun shade.
ISOD - DJI on screen display installed in the quadcopter
GoPro 3+ Silver camera with 32mb sd card and ND filter. Added a nickel to counterweight
for the filter. Balanced it great.
All extra GoPro mounts that it came with.
Wider/Taller landing gear.
Wall charger
All stickers and paperwork
EXTRAS include:
V1 Transmitter with GoPro mount for monitor
Mobile Charger
2 - regulal landing gear - one is new in package, other was the original from the P2
NIB P2 replacement shell - the shell on the P2 is fine. On a small crack on the top of the
shell by one of the motors. I though it might get bigger but it never did so I never needed to
install it. You can fly it forever like it is.
Complete set of new in package DJI props
Several extra FPV antennas I was playing with before I bought the good ones
6 - ribbon cables for the gimble to camera - you don't need these because I added the board
with the connector that plugs into the back of the camera - you can sell these.
One new in package noise board - I am not sure why I bought this since the one in the P2
works fine.
Original box for P2 and H3-3D - will increase shipping costs but I have them if you want. P2
Will not fit in the original box because of the wide/tall landing gear.
Like I said it's everything in the pictures. If you have any questions please send me a PM. I am
on here everyday. BTW this P2 has never been crashed or had any damage. I am 63 years young and have been flying RC airplanes and helicopters since i was 16 so it was a easy transition to flying quads for me.
Here is the link to the long range antennas. They are the ones that are $116.33.
Phantom 2 (non vision)
More pictures to come in a second post.
Last edited: