no image transmission

  1. K

    P3P went broke after firmware update

    Hello, I have the problem after not using for a while (6,7 months), my P3P can't live image on DJI GO app, can't read SD card I usually maintain my P3P every year, take her out and give her a few ride but this year when I turn on my P3P DJI GO app on my Iphone, it shows blackscreen with dji...
  2. A

    Cold temporarily fixes no image transmission, 8/15 module problem?

    My Phantom 3 Professional will not provide a video feed to my mobile device at room temperature. I tried all the typical diagnostics and see the common [08 00] and [15 00] "device not detected" message in the log file. However, I can fix the problem if I put the aircraft in the freezer for five...
  3. M

    Help! No video signal and gimbal pan

    I have had my P4 for about 10 months and have never had a crash. Recently, I have been having an issue where my display on the app will go black say no image transmission signal and then the recording will stop. The video will then come back but the gimbal is panned almost completely to the...
  4. Chuck1906

    No Image Transmission alert - P3P

    I am experiencing No Image Transmission alerts on just about every flight now. Usually happens right after I calibrate the compass before take off and other times it happens in mid flight. Screen will go to black and white then freezes then goes to black. My P3P will then give me another alert...
  5. M

    No image transmission after P3A crash

    Hi, My P3A fell out of the sky. Seems like suddenly there was no power at all even though the battery was 86% full. Luckily it dropped onto sagebrush (or a similar plant) and apparently only the vibration absorbing board was broken. Some rotors also broke, and I replaced all of them. One of...
  6. TKofoed

    No Image transmission

    I just got my P3P back from repair. Had an encounter with a tree and the Gimbal arm was bend. When I booted the Phantom upI wanted to make sure that I was up to date on FW and recalibrate the IMU. Upgraded to Firmware v1.9.60. - but once I was back up, I get "No image transmission". I see a lot...