Recent content by scorpiopaulius

Im having same problem. After crash to tree, my YAW arm was bend and gimbal flex cable shorted on bend. I replaced arm and flex, but camera tilted horizontally. video I think to change motor, but there is alot comments that it could be ESC not the motor. And motor and ESC are programmed so if I...

Yeah, i will, just windy these days in my country :D

So I did flight test with that battery... DJI Flight Log Viewer - PhantomHelp.com now battery level and voltage seems OK...

maybe you know how much voltages in cells are when they reach 8%? :D

Thanks FlyDawg for graph. So charger this time charged fully(looks to me) and did again some hover(up an down) test. hover 1: DJI Flight Log Viewer - PhantomHelp.com hover 2: DJI Flight Log Viewer - PhantomHelp.com this time cells voltage looks more acceptable I think. but percentage is way...

This was first flight when I saw battery damaged DJI Flight Log Viewer - PhantomHelp.com I was trying OA near walls, to look how they work in action. then hover test: first fly until I landed DJI Flight Log Viewer - PhantomHelp.com and second fly after I landed DJI Flight Log Viewer -...

So second discharge and I put to charger... after like 30mins it stopped charging. popped battery in drone and saw this view... Battery balancer not working? :(

So I "drained" battery. Drone turned off itself, After powering it ON it should down itself. OK, I put it to charge. like after hour I saw it third from left LED blink twice on repeat... google it and its say overvoltage protection... ok, I put it to test. put in drone, and it showed me 100% :O...

So trying discharge just by leaving it ON, but cell voltage difference is worrying me :(

So my journey with phantom 4 going not very well... I had bad flex cable, fix it, cracked body - glued it and now I take it outside and after 10min flight got battery damaged error... ****... it was like 46%... so I turned off battery and went for google information. and got some suggestions to...

THANK YOU for this post.... I followed idea to rollback one FW down and BAM, works good. No more random VPS to 0.0... RTH with OA enabled works, forward speed with OA enabled looks like going good, atleast up wind I reached 25kph, enough for me in GPS mode, because I ussually fly in ATTI.

So I found out that one of my flex cables was damaged, that connects board with internal sdcard and board that conect sensors(VPS, ultrasound, gimbal). I changed that and did flight test to hope it fixed slow speed and VPS random 0.0, but still get it... DAT file and App log file . VPS and OA...

So got part34 from local store, changed flex... Looks like sensors working after test flight ?

So as far as I understand this flex is part of phantom 4 part 34 set or part 50 set? Because at my local stores one say its from part 34 set, other say its from part 50...

so took apart drone, removed bottom cover... found bad news :( One flex with TAG FLY_CTRL that goes under internal SDCard is cut in half ;( where I could find it? I really hope I dont need to buy like full internal organs... Edit: As I understand that flex is one of Part50... Need to find it...