Recent content by Rva1980

Private messege me if you can or will, that way we can exchange some info to make it easier and faster to communicate.

What all things have you check thus far so i can help you rule out some things.

I did several things to fix mine.

Did you crqsh yours as well?

C Anyway you can post a pic of which screw you are exactly talking about?. Im thinking you are talking about the screw thats under that ribbon that wraps around a time or two right next to the camera itself?

Not to imbark on your post rallin but rodpad do you think this might be the same issue i have?

some help out here, i recently crashed p3s. I broke the camera arm, tore the camera ribbon. I replaced all the parts and after putting it back together and flying it it now has this shake in the camera. Could anyone help me out on this please

Thanks for all the advice guys... i used a razor to clean all the clear resin off of the motor wite leads, soldered them all back togther and they worked. Now i have to fini

Thanks for all the advice guys... i used a razor to clean all the clear resin off of the motor wite leads, soldered them all back togther and they worked. Now i have to finish putting all back together and see if it will actually fly. One thing i did notice is after putting tbe motors back on...

Oh ok, so the wires with in the colored sheeth are also insulated as well and them to make good solid connection they also have to be cleaned of the coating it has. I will try to clean and re-solder them and i hope this will fix the problem. I should have never cut the ends of the 2 new motors...

Im sorry, i am new to all this. Im not understanding what you mean. New, yes the leads were longer i cant remember what then ends looked like as i had cut them off and threw them away. I hope this wasnt a big mistake on my part. Ughh

These wires?

Do these have to be individually connected a certain way?