Recent content by PJA

Here is a test flight of the third reincarnation of my Phantom 1.5... Newest Additions are: * P2 Circuit Board, * 9450 Props, * FrSky X8R Receiver, * DYS 3-Axis Smart Gimbal * and RETRAX Landing Gear...

Re: Video: Fitted my Phantom v1 into a Phantom 2 shell (easy Can you share a link for that cover??? Thanks...

Re: Video: Fitted my Phantom v1 into a Phantom 2 shell (easy Well guys... I went from the P1 Board last year, to the upgrade board last summer, and this weekend I add the P2 Circuit Board to my Phantom 1.5... I also upgraded from a FrSky X4R to a FrSky X8R Receiver... It's been a long year of...

Re: Video: Fitted my Phantom v1 into a Phantom 2 shell (easy Here's were mine is located... in the little slot inside the door cover... Neat and out of the way... The mod is found around page 39 of this thread... Someone else did it on this web site and I replicated the mod for this...

Re: Video: Fitted my Phantom v1 into a Phantom 2 shell (easy You don't have to double side it... Dewey figured out a way for that too... Maybe you can create something similar for yourself...

Re: Video: Fitted my Phantom v1 into a Phantom 2 shell (easy NO, NO, NO... Don't do all that work and ruin the P2 Shell... Get one of these: http://www.ebay.com/itm/DJI-Naza-M-V2-Led-W-USB-Connection-/181296915826?pt=LH_DefaultDomain_0&hash=item2a36236572 Then get one of these...

Re: Video: Fitted my Phantom v1 into a Phantom 2 shell (easy Hello Tobrouk... Just a couple questions... Did your Phantom 1.1.1 com with the NAZA v2...? Mine came with the red NAZA M... Where did you stick your Flytrex Core 2? Very neat job... I still need to swap my Upgrade Board for the...

Re: Video: Fitted my Phantom v1 into a Phantom 2 shell (easy Hey Dewey... I'm actually not an owner of the H3-3D... I had the H3-2D which became damaged in a crash... I ordered a 3D but that got lost in the mail... Then I saw that a lot of people had problems with the H3-3D early versions so I...

Re: Video: Fitted my Phantom v1 into a Phantom 2 shell (easy I haven't used it, but a few people on this thread said it doesn't work that well... Maybe if you do a search in another thread you'll get a more favorable answer on how good it is and how it works... Good Luck with the P1.5 build...

Re: Video: Fitted my Phantom v1 into a Phantom 2 shell (easy You guys could always upgrade to a P2 Circuit Board... I have the regular upgrade board and did the CanBus Solder upgrade to it also... Everything works fine... However, I think it was ElGuano or EMCSQUAR (see previous posts) who...

Re: Video: Fitted my Phantom v1 into a Phantom 2 shell (easy Yes... I use that battery... It fits perfectly...

I have both Futaba 8J and FrSky Taranis... I went with the Taranis through the recommendation of an RC colleague from this site. I seemed to outgrow the Futaba and needed more channels to set up on my f550... I use the Taranis for both my Phantom and f550... The Taranis is a more advanced...

Hello Kevin... Unfortunately, the build I posted above never took flight. A fractured left elbow and right wrist put a stop to any test flight I planned about 6 week ago. Instead, I did research on extended f550's on Youtube and thought better of adding an E600 series propulsion system from...

So I guess everyone this Holiday Season is getting either a DJI Inspire or the DJI S900... :D Neither is happening very soon for me, so I'll try to revive this thread with my new Flamewheel project, if it will interest anyone... I'm still rebuilding my f550... A few post back I posted pics...

Hey Elguano... I did this slider mod with my original Phantom 1 TX without the LED awhile ago. I once showed you in another post. However, I also had a Slider Pot with a green LED and never knew exactly how to solder it on the TX Board to get it to work... The TX you are working with looks...