Recent content by Levitate

I was able to do some more bench testing. The transmitter controller only is able to reconnect with the AC with the gimbal board attached. Also without the gimbal board the transmitter light is solid red. I also did field testing with different max distance settings and once I changed it to 500m...

I did some more bench and field testing today. 95% sure that this is a gimbal control board problem. Just FYI

Yes routine red 10 seconds, green 10 seconds...repeat. Link light on Phantom is always solid green. App connects and displays all info showed including battery only momentarily. I will have to retest and look at what the signal level says. Thanks

The settings remain and changes in RTH function as set. Max distance is also not set, or unchecked.

3rdof5 Thanks for that suggestion. I did do this several times but not in a signal free area. It linked no problem multiple times, and the green light for linking is steady on the aircraft. Also the wireless connection between the transmitter and phone stays connected in airplane mode.

How far line of sight in a field would it go? Mine hits an imaginary wall and won't continue farther than about 100yards. Sometimes then doing a RTH. I have tried it both with my gimbal board attached an detached. Same results, but my gimbal is broken and appears to have shorted on the flat...

Sebazios I am having a similar switching red then green light on my P3S. In know the gimbal is broken on mine. I'm thinking that somehow the electronics board for the gimbal is causing this issue. I can fly mine line of sight fine for about 100 yards only. You may only need to replace the gimbal...

I have just acquired a P3S and am having issues with radio connection. The gimbal is broken. I am able to fly it fine within around 100yds line of sight. But that is it. It just hits an imaginary wall and sometimes initiates a RTH from I believe radio link brownout. The controller switches every...