Recent content by Layupé

You feel like you have been ripped off because actually, you have been ripped off by DJI ) I owned the SE "pre-CE ********" and when DJI decided to left their European customers with an expensive piece of crap on their hands I did the FCC "mod" (it just barely consists in using an app that can...

Here it is mine, phantom 3 SE, high wind, around 69 mph or 112 kmh...

Not bad, here is my best one, 69mph = 112km/h

Honestly, if you are using version 3.1.8 of DJI GO then that's the reason and not the video cache. I am not saying that turning off video cache will do nothing to improve the video feed but sure it will not fix it and I had not any problems with it turned on early before the stupid update that...

My bad, you were talking about 3.1.8 and I understood 3.1.18...Now it's clear the differences with app I am running!

Yes, in my case the same window to switch WLAN settings will pop up when I lose connection with the AC and it reconnects, just the same way like it does with other versions of the app. It's strange that you don't have the frequency switch option, i understand you have it with other versions of...

I am using the 3.1.18 version of the app and there is indeed frequency switching option, also can and does switch to CE mode...

Please try the way I do it: 1- Open fake GPS, set fake location 2- Turn on remote controller 3- Open DJI GO app and push on "camera" when it will open, make sure the map is reflecting your fake location, if not, switch off and then on GPS on phone and try again, if still not close DJI GO and...

While I can understand your point, it's also true that many people ( I think maybe most of people) are not going to fly their phantom 2 or 3km away, but they at least expect solid performance of the aircraft within the CE range, this is maximum 500 meters? Ok, so a solid and agile control...

Oh yes, there is a way to know about it; Check on the Wi-Fi settings, 2.4ghz tab, if there are 11 channels you are on FCC, if there are 13 channels you are in CE mode. On that firmware, if you never updated it to the last one and after downgraded it should be on FCC mode.

Chatikib, I thought you were in FCC mode, isn't it? Your phantom is on CE mode? Last firmware?

Forget about "security reasons", it happens, yes, go far enough so that the rc will lose signal and the switching wlan window will come to you, it happened to me twice already...

I have tested it outside and it worked. It is not a solid solution and often require to switch off many times everything until you are ready to go but I had few flights in FCC mode by using this method. I don't know why, I think once you manage to force the FCC mode correctly the switching...

Some users confirmed litchi to be working with P3SE on IOS without problems. By the way i have laying around an old iPad, i am not sure if is enough powerful already for this task but i think I will give it a try and let you know.