Recent content by Jesolins

Hi Gents, I have noticed that the two Phantom 4's that I have with yaw issues of pointing off center have the following characteristics when compared to other perfectly working Phantom 4 camera gimbals: When the P4 not powered, with the bad yaw center is leaned forward on its arms, the gimbal...

Hi and thanks again. The firmware has been successfully updated on both the RC and Quad. I can link that RC successfully with my other P3P's so it is not the problem. The P3P OFDM LED blinks orange before and after the linking button is pressed. It should be blinking red. Not sure what...

Yes thanks I did that and also tried to do the manual link without using the Go App too. What does the orange LED mean? On my other P3Ps it is only green and red, never orange.

Hi Gents, I have a P3P that will not link. The OFDM link LED blinks orange and will not blink red to link when the link button is pressed. Any ideas as to what causes this? The firmware was updated a few days ago. It flew fine several times with no hard landings the day before... Cheers, Jim

Via SD card. Formatted extfat. Latest bin file that worked fine on anther P3P that I upgraded.

Gents, I have the same module 19 firmware upgrade issue on one of my P3Ps. Did anyone find a solution? Cheers, Jim

+1 Great ideas Gents! Cheers, Jim

Hi Gents, A work around when you get the "Request Timeout" after attempting to log in to the Vision application is to log in with "dji" and password "1234". Your Vision application will then work normally. Cheers, Jim

Hi K, The potentiometers on each axis often cause this too if they are damaged. Check the ohm values. http://www.rcgroups.com/forums/showpost ... count=7514 Cheers, Jim

Hi, Is there a way to move the grid over the area you want to fly over? It seems to just put it in an orientation that is not optimum based on where the application is started. Also is there a way to get multiple grid missions merged together to finalize a larger area? Cheers, Jim

Re: NOW AVAILABLE: Phantom 2 Vision+ Camera Ribbon Cables @ Good man and reasonable DJI Vision Plus flex ribbon cable pricing @ about $25 ea Steve. Thanks for not ripping off the hobbyist! Hope you have a million of these for sale this time!...;) You're gonna need 'em... Cheers, Jim

Re: UNOFFICIAL Vision App for Android (Distance, Speed, etc) Hi t, I suspect it is a setup issue in your Acer tablet since you are not having the problem with your LG phone. Check the wifi setup and make sure all the other Wifi connections you have are deleted or set to "forget". If the...

Re: UNOFFICIAL Vision App for Android (Distance, Speed, etc) Hi j. Interesting video...;) Did you use a spotter in the car to control camera tilt and your position? Cheers, Jim

Re: UNOFFICIAL Vision App for Android (Distance, Speed, etc) Gents, With the release of the new DJI Inspire the SDK for IOS and Android application was also released. Hopefully it will benefit Phantom users application developments: https://www.youtube.com/watch?v=TznaDRRC_lw Cheers, Jim

Re: UNOFFICIAL Vision App for Android (Distance, Speed, etc) These power banks are great too for keeping phone, etc charged for a long time: http://www.ebay.com/itm/231249494074?_t ... EBIDX%3AIT Cheers, Jim