Hi! The issue was related to noise on the GPS module afterall. It seems in my case the wifi module is more noisy than common. I removed the GPS module from the shell and it found a couple of satellites. Put the GPS module back in the case with the aluminum foil trick and It improved a little...
The GPS module connects to the main board thru a 4 wire pin (+5V, RX, TX, GND) and then there's a 3 wire pin connecting the motherboard back to the FCU thru the EXP port, that's known to be GPS related.
Do you know what's the pinout of this 3 pin wire? Maybe one of them is not working. That...
Hi Mark, so, I've charged the batteries and inserted the sd card. Video was recorded perfectly and everything else works fine.
The compass seems OK as the mod value is in the recommended range and I'm not getting any error related to that.
Only the GPS is still grayed out.
So, as of my previous post, I'm recovering an old P2V+
Rebuilding old Phantom 2 Vision Plus+ recovered from electronics trash
The old GPS module was bad, so I disassembled it and it had a cracked antenna. Even after replacing the antenna I could not get a GPS fix (by manually debugging with...
Hi, thanks for the reply. The problem was that I was trying to feed "Naza" data directly into the uBlox software, which of course would not work. (I was connecting the cable that goes from the gps to the main pcb)
So now I directly connected the UART converter intercepting the TX pin of the GPS...
I'm trying to connect the GPS board (uBlox NEO-6Q) from my Phantom 2 Vision Plus to the computer to test GPS signal after replacing a broken patch antenna, but it cannot communicate thru the uCenter v23.08 software, nothing appears there.
If I open the com port directly on a terminal software I...
I tried with a 12V / 2A power supply adapter from my fiber optics modem and also with the 12V / 10A from an ATX 350W PSU (also tried black/yellow 12,2V / 15A).
My Phantom 2 battery just keeps blinking the first led but does not increase, it's been almost 1 hour and it's still blinking only 1...
In the end it was just a cracked trace. I've made a wire jump from M3 connector directly to the flight control unit wire and it worked, drone is functional now. Thanks.
So, I've got this old Phantom 2 Vision Plus+ from a friend, it was about to be discarded so we decided to recover it.
It came with original box, but it was completely disassembled, seems the original owner had plans to sell the parts separately and gave up on that later.
It was only missing the...
If you're using iOS you can download it here
https://apps.apple.com/br/app/dji-vision/id669439159
If you on Android you can download here
https://apkpure.com/br/dji-vision/com.dji.vision
But the Android version doesn't seem to work, it fails on the login screen. The iOS version works fine on...
I’ve installed the app from the apkpure link on my android device but cannot login, is there a way to bypass the login screen? Seems the server is not available anymore
Hi! I have a Phantom 2 Vision Plus+ and although the video is working thru Wifi (DJI Vision app) after sometime it disconnects and show the message "Phantom connection break". The drone is very close to the wifi repeater and also is my device, so it's not a signal issue. What could be the reason...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.