motor e clip

[cptdarel]

yup!,,,,I lost one of the motors e-clips, taking one apart to balance motor housing, any idea of where to get a set, Ebay has them for 450 but can't seem to find some for P330

 

[dcoski]

I went to a auto parts store (NAPA) and picked up one.

 

[Gizmo3000]

All he Phantom/330/450/550 motors are the same (generally, tho the new ones might be a tad different).
so the 450 e-clips should work.

 

[cptdarel]

Thanks guys I will check it out!

 

[Driffill]

eBay item # 251349848800

I had one pop off, and when I tried to replace it it broke, I actually bought some that did the job from a local rc shop, but I found these while searching

 

[dcoski]

I also bought a bearing kit on ebay and got them with in a week. I have not installed the bearing yet,but they look like they are good ones and they come with e-clips.

http://www.ebay.com/itm/261241628436?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

 

[miskatonic]

If you are going to do any kind of bering work, white lithium grease is your friend! I had an anti grav motor take a face plant into some beach sand. I cleaned it all out and used white lithium grease on the bearings. It worked like a charm!

http://www.amazon.com/Permatex-8198...83329042&sr=8-4&keywords=white+lithium+grease