YEP, YOU GOT IT. Actually almost no one can move both sticks down perfectly simultaneously to NOT put flipping torque into the props.
I COULD say RTFM but i won't
Control Stick Combination.
landed on side, squeal and smoke
- Thread starter whichgreekisland
- Start date
YEP, YOU GOT IT. Actually almost no one can move both sticks down perfectly simultaneously to NOT put flipping torque into the props.
I COULD say RTFM but i won't
Control Stick Combination.
- Joined
- Feb 17, 2016
- Messages
- 644
- Reaction score
- 255
- Age
- 29
I was flying over one of our wheat crops ,stopped to hover lower as I moved forward the AC caught the crop and dropped in .
What would you do in the situation ? CSC or left tick down ?
I Did a CSC but not before "motor obstruction"and "gimbal overload/ obstruction "? Flashed up on the app .
The A/C went in only 80m from me but the green wheat was so thick I though I could be standing on it before I would see it.
I spent 3/4 of an hr looking and in the end I thought if I don't find this it is going to end up back in China nicely mixed through a truck load of wheat.
There wasn't any wind so I did two quick CSC s start then stop .I heard it not a1.5 metres from me!
When I went back to my take off mat and tried to fly only one motor would spin up so I switched everything off and started again .Everything seemed OK IMU calibration recommended (or something similar ) popped up on the app momentarily.
I hovered then did two flights with no problems.
Anything I should have done differently ?
What would you do in the situation ? CSC or left tick down ?
I Did a CSC but not before "motor obstruction"and "gimbal overload/ obstruction "? Flashed up on the app .
The A/C went in only 80m from me but the green wheat was so thick I though I could be standing on it before I would see it.
I spent 3/4 of an hr looking and in the end I thought if I don't find this it is going to end up back in China nicely mixed through a truck load of wheat.
There wasn't any wind so I did two quick CSC s start then stop .I heard it not a1.5 metres from me!
When I went back to my take off mat and tried to fly only one motor would spin up so I switched everything off and started again .Everything seemed OK IMU calibration recommended (or something similar ) popped up on the app momentarily.
I hovered then did two flights with no problems.
Anything I should have done differently ?
Oso
Premium Pilot
Welcome sir.
If you are interested, click the link below for a few tips I like to share:
Soon to be new owner phantom 3 advanced
CSC actually stands for Combination Stick Command.
Cheers!
Last edited:
Similar threads
