When I power up the p3a the internal card reader keeps trying to read the card after the green led turns solid. Card in or out. Is this normal for the p3a as my p3p does not do this. Since this started i cannot connect to the aircraft.
Internal card reader
- Thread starter R*H*R
- Start date
You wouldn't by chance have left a firmware .bin file on the card would you? Otherwise try re-formatting with PC.
alokbhargava
Premium Pilot
P3A will read the card to check if card is present
It will execute the bin file if present to check if battery FW needs to be updated
It will start installing the FW if the bin file has later version of FW that what’s already installed on P3A
It will turn the led red if it doesn’t find the sd card.
It will execute the bin file if present to check if battery FW needs to be updated
It will start installing the FW if the bin file has later version of FW that what’s already installed on P3A
It will turn the led red if it doesn’t find the sd card.
I updated my P3A birds and controllers to the latest, and plugged all my batteries in with the bin still on the card. Do the 3 red flashes on the camera led signify that it has updated the battery FW?
Last edited:
It shows correct FW and just for a second as it powers up it shows ready to fly then goes to magnetic field interference.
The internal reader keeps trying to read whether the card is in are out. Continuous. My p3p only purrs after start up.
The internal reader keeps trying to read whether the card is in are out. Continuous. My p3p only purrs after start up.
I took the compass from my P3P and put it in the P3A. Everything working perfect now in the A but the P is down now.. ordered new compass.
Thanks everybody.
Thanks everybody.
