Recent content by Xelodaki

It's a AI helper that you can ask questions; "ChatGPT is a conversational AI chatbot developed by OpenAI, designed to generate human-like text in response to user prompts." Google it :) ;)

I'll take a look 😁 I ordered them from Germany, atleast they weren't cheap like in aliexpress or ebay...

RF and LB arms are cracked, no effect after fixing them with glue. I already ordered Motor reinforcements, also just ordered New motors, if those won't fix it, i Will order New mainboard with motors. Really want To get this drone working 😁 It Will still be cheaper than buying working used one...

Yeah, so i just had looong conversation with Chatgpt and to my suprise it can analyze .DAT and .CSV files, and gave me plot from motor pwm, voltage, throttle etc.. In conclusion Rfront and Lfront motors are bad or corresponding ESC's are bad, here is small text from GPT: Here we go — now we...

There is no DJI logo on the props, only 9450 and 9450CW.

The drone came with like 4 sets of props. Don't know if they are OEM or not. Props that i put on it were New.

Yeah Well i don't have any spares. 🤷

Just went for test flight with glued arms, no effect, problem is still there. Calibrated compass and IMU, ok no errors. Tested the drone with propellers attached on my table and holding the drone down, and there is no rpm problem, only occurs when trying to fly it and on uneven surface (ofcourse...

Do you think that the cracks causes rpm problems? I epoxy glued them yesterday, not tested yet. Quick Google search and i can also order metal reinforcements for it.

Here is link for the 3 data logs when i first time tried to fly it; DAT log PH3P - Google Drive

Yeah so i measured all mosfets, no faults :(

Ive been lookin the mainboard through with a digital microscope, can't find anything that stands out, also very hard to get clear image because of the glossy coating on the motherboard. One wire on the camera connector is almost broken, but i suspect i damaged it when breaking into the shell :D...

Is there any obvious place to look for? I already have the drone shell open.

Thank you!! :) Here is picture of the cracks.

Hey guys! I bought used Phantom 3 Pro in hopes that i could fix it. It has weird problem with the motor rpm's. When using the lift-off feature on phone, 1-2 of the motors spins erratically, like up and down in rpm's, almost impossible to get the drone into hover/fly. Then i tested the drone...