Recent content by Serpent

  1. Serpent

    Downgrading firmware on P3P from 1.10.9 to 1.7.6

    Can safely say that after all the loud beeping and modules not found that the drone is working as well as ever again. Thank you to Chazz for his great help. I'm not sure if that was the definitive thing that fixed it as it was when I re-applied 1.10 that it finally stopped the loud beeps and...
  2. Serpent

    Downgrading firmware on P3P from 1.10.9 to 1.7.6

    Thank you Chazz. :) Great help. I finally got it working again. Took many hours of updating and lots of waiting. Re-calibrated the compass and got it to talk happily with RC which was at a lower firmware level.
  3. Serpent

    Downgrading firmware on P3P from 1.10.9 to 1.7.6

    Well.. remarkable.. I thought to retry 1.10 firmware again and this time finally the bird stopped the loud continuous beeping after waiting about 20 minutes. It took about another 20 minutes for the process to completely finish. Now I have just flashing yellow lights and no camera view from the...
  4. Serpent

    Downgrading firmware on P3P from 1.10.9 to 1.7.6

    From what I see on the P3X_FW_LOG_AB file and according to this source (DJI Firmwares · mefistotelis/phantom-firmware-tools Wiki · GitHub) the ESC center board and VPS Module board are not being detected. Wondering if a hardware failure occured during the downgrade/upgrade process. Does anyone...
  5. Serpent

    Downgrading firmware on P3P from 1.10.9 to 1.7.6

    I just saw this on GitHub which shows that it may be a 2 step process (one with debug file present and one without debug file present) to properly downgrade each firmware so there is no '+' showing in the DJI Go app About page. Apparently the '+' means there is a firmware module mismatch. 1.10...
  6. Serpent

    Hi Sevyn, I read that you bricked your drown with a firmware downgrade. I may also be in the...

    Hi Sevyn, I read that you bricked your drown with a firmware downgrade. I may also be in the same place with constant loud beeps when switching on the drone. I was wondering how you may have got yours working again ?
  7. Serpent

    Downgrading firmware on P3P from 1.10.9 to 1.7.6

    Help.. My Phantom is stuck. I tried downgrading from P3X_FW_V01.10.0090 to P3X_FW_V01.06.0040 going one firmware at a time. After waiting for the sound to stop and the LED to stop flashing it then went to loud continuous beeps after turning on. I tried to re-do the last firmware but it didn't...
  8. Serpent

    Careless drone flyer could have killed me

    'The Springs' was the only reply that connected with me. A bunch of replies didn't even seem to read the original message properly. It was in the heart of a city. Not open water. There may well be compass errors when flying close to buildings but that doesn't mean it was the compass error that...
  9. Serpent

    Careless drone flyer could have killed me

    I was walking around 6pm at All Seasons Place, Bangkok last Wednesday evening when an 'object' came tumbling down from the sky and crashing to the floor a few meters in front of me in the path I was walking. Another object hit a close by car. If I had been walking just a little faster it could...
  10. Serpent

    New: HealthyDrones.com - cool health checks for your Phantom

    Great work what you're doing Eran. I uploaded one of my logs from a flight where the app said ', 'click');']Tips__Severely low voltage, the aircraft will land now' about 2m19s into the flight and with about 55-60% battery left. I thought I may find something interesting from your analysis but it...
  11. Serpent

    Can you give some indication of the price?

    Can you give some indication of the price?
  12. Serpent

    P3 owners - 500m max height ?

    How many buildings are over 800m?!! [emoji50]
  13. Serpent

    How did this happen? Crashed under a bridge

    I would have given them a tip for taking their time to support your misadventure. Lucky you got her back!
  14. Serpent

    Rolling back Firmware success!

    Could someone share a link to the .bin file to erase the current firmware?
  15. Serpent

    No more limits. Do not do it.

    Thoughts: It looks as if the ascent rate is about 1m/s doing this. Slower than normal ascent. Being directly underneath the bird doesn't usually give the best signal so having this reflective antenna setup -or- setting the home point 100+ meters horizontally away from the actual pilot position...