Recent content by sardelich

  1. S

    lightbridge firmware PROBLEM (and solution) - firmware version not found by dji assistant tool

    Anybody had any success running assistant on windows 10? i did reflash few times, every time everything was ok, now both ground and air unit are not recognized in Windows 10. Disabled LUA, installed DJI drivers, disabled driver signature.....
  2. S

    Misinformation about differences between P4P and P4Pv2 on the internet

    they call it FOC.it is much more smoother sinusoidal wave, reducing the noise a bit, heat, improving efficiency. low noise props are the ones responsible for lower noise
  3. S

    Misinformation about differences between P4P and P4Pv2 on the internet

    mavic pro uses occusync v1, p4prov2 uses v2.the stability of the signal in rural enviroments is significantly better.my bad, regarding lightbridge for mavic, but p4prov1 uses lightbridge 2.but still, in real situtation I had much better results with p4v2.and also, comparing p4 v1 to v2, the...
  4. S

    Misinformation about differences between P4P and P4Pv2 on the internet

    v2 is noticeably quieter than v1.different escs, different props.slightly more flight time due to different escs.occusync is miles ahead of lightbridge, where mavic pro strugles to get the signal, p4v2 has rock solid 1080p video feed.other than that, pretty much the same craft, escpecially...
  5. S

    01.00.52.00 firmware

    did an update yesterday, all went smooth.did anyone notice any difference?
  6. S

    Phantom 4 pro stress cracks

    remote in left hand, slowly fly to just above head height,hover, right hand gently catch the drone for one leg, left hand throttle down.motors stop.did it hundreds of times, not a single crack.and it is the safest way for a drone.rarely they do want to tip over when landing on ground.and add the...
  7. S

    Third-party apps on P4P+v2.0 GL300K

    in short.forget it.the usb cable hack works for only V1.V2 for now is unable to run any application other than DJI.actually the apps will run, but they will never connect to a drone.
  8. S

    Phantom 4 Pro+ v2.0 any news with third party apps ?

    I went deep into android with rooting, ADB, debugging, recovery bla bla. Every single thing points out that it seems that it is a hardware limitation. There is just no connection anywhere for data for the usb port. Looking at the inside, the design seems that it will not allow the controller to...
  9. S

    P4 Firmware Brought back from the dead? New V2 firmware.

    Yes, I should recalibrate the remote and adjust it. But on previous firmware it was much more relaxed on default settings. It seems to me that images have better details, maybe a bit more dynamic range, did a shoot this morning, really bright sunshine, everything was there, the shadows the...
  10. S

    P4 Firmware Brought back from the dead? New V2 firmware.

    Did the update few days ago, flied today. It works. But....yaw is a bit more sensitive, also you have to calibrate the remote after the update, its really nervous and I think deadband around center of the sticks is much smaller. Pretty sensitive on yaw. Braking seems the same. It does feel a bit...
  11. S

    Litchi on a P4PV2 Plus display, no connection, please help

    as far as I know, 3rd party apps will not work on V2.0.
  12. S

    P4 Firmware Phantom 4 pro plus v2

    that is app firmware
  13. S

    lightbridge firmware PROBLEM (and solution) - firmware version not found by dji assistant tool

    I'm in Croatia. I succesfully did both ground and air unit recovery. If you need assistance, let me know.
  14. S

    lightbridge firmware PROBLEM (and solution) - firmware version not found by dji assistant tool

    I know I should have used one, but none was around. And since it was dead anyway, I tried. 6 months ago I had a dead ground unit, saved it with this procedure, but air unit needed some more work. Now is ok. Im curious how much will it hold. Although ground unit was without the battery for 6...
  15. S

    lightbridge firmware PROBLEM (and solution) - firmware version not found by dji assistant tool

    just to confirm. Shorting the pin that LB_Victim found to GND, without any resistors works like a charm. I had issues with air unit, updating firmware as we speak :) Thank you 1000 times. A year ago I had issues with ground unit, now air unit went nuts :/