Recent content by putterizer

  1. P

    Help, What is wrong with my Gimbal?

    I bought a genuine DJI cable off ebay. This is the seller I used. Item is correctly described and shipped it quickly. DJI Phantom 3 Flexible Gimbal Flat Ribbon Cable Flex Cable Part 49 For Pro & Adv
  2. P

    Gimbal tilt problem

    I had this problem too. Aligning the flat spot of the shaft to 12 o'clock position when the camera was level corrected the problem for me.
  3. P

    Help, What is wrong with my Gimbal?

    Mine did the same exact thing with the 3 beeps and flashing lights after I ordered and installed a cable off ebay that said it was genuine. I ordered a genuine DJI cable for a bit more money, installed it, and everything works perfectly fine. I learned my lesson buying a 3rd party cheap cable...
  4. P

    My 1st edited video - Big Iron Classic Semi Truck Show

    I went to the Big Iron Classic Truck show in Kasson, MN a week and a half ago. Naturally, this required me to take my P3P with. 4 days before I went, the POI features were released. There was a nice little water tower there to try out that feature on. I also got footage of the light show...
  5. P

    P3A just beeps after new download

    That is a different noise/beeps that what mine was. When mine was doing the alarm clock beeping, none of the arm lights were on.
  6. P

    P3A just beeps after new download

    Did you try the instruction I left in the post above yours? I think the key is to getting the memory card formatted in the bird, and not a regular computer.
  7. P

    Does your Phantom 3 beep like an alarm clock after upgrade? [Fix in here]

    Here is the problem I had- I put the new 1.4.0010 BIN file on a freshly formatted SD card and fired the P3P up. It beeped and flashed like it normally does for firmware upgrades. I waited until the gimbal light was green, about a half hour later. I then turned off the bird, and turned it back on...
  8. P

    P3A just beeps after new download

    Here goes...I finally got Phantom 3 Professional Firmware v1.4.0010 installed. I used a hodgepodge combination of different things I read about on here today. So I am not exactly sure what the root cause was, but here is what I did to get rid of my never ending alarm beeping Phantom. Removed...
  9. P

    New Firmware is up

    Ian- Mine is doing the same thing you are describing. Its doing the really loud beeping like an alarm clock and has no lights on or off other than the gimbal light. I have turned it on and let it go for about 30 minutes. After about 25 minutes, the camera light goes green, but it still is...
  10. P

    Won't upgrade

    Can you be a little more specific? Maybe some steps? I'm lost as to how you can use the app to do it, since the app is on the tablet, and the tablet plugs into the remote control. Thanks.
  11. P

    Won't upgrade

    How do you update the bird using the cable, and not the SD card?
  12. P

    P3A just beeps after new download

    I have read that too, but what baffles me is that it beeps like an alarm clock and the gimbal light flashes red/green, for about 20-25 min, then goes solid green. It acts like it is done, but the loud beeps are still going, even after the gimbal light goes to a solid green. I sure hope that a...
  13. P

    P3A just beeps after new download

    Same issue here. I put the new BIN file on a freshly formatted SD card and fired the P3P up. It beeped and flashed like it normally does for firmware upgrades. I waited until the gimbal light was green, about a half hour later. I then turned off the bird, and turned it back on again. This time...
  14. P

    Anyone in Wisconsin?

    I joined up in the group. I live in the La Crosse County area.
  15. P

    Wisconsin UAV Pilots Group on Facebook

    I joined up. I'm on the west coast of Wisconsin, in the La Crosse area.