Recent content by POVoutfitters

If you have control of the Phantom, such as being able to move the camera. I would suggest an IMU calibration. Be sure and follow the many tips and guides on this forum and feel check YouTube for visual guides. Make sure the unit is cooled down and preferably been powered off for hours...

Do keep in mind, if you're flying UNDER something and RTH is triggered, your phantom will rise all the way up to the "point of impact." [emoji1] Sent from my iPad using Tapatalk

Next time you fly your "regular" spot, double check how high you need to manually fly to be above the trees or other height obstacles. Make sure your RTH height is set ABOVE those. Otherwise, you run the risk of some type of controller failure triggering RTH and you get stuck watching your...

REMEMBER to have your return to home height set above tree or nearby obstacle height. If the height is set too low, it will RTH into a tree while trying to come home. Sent from my iPad using Tapatalk

PM sent asking details about items.

PM sent

The one common variable you mentioned, seems to be the SD card. Are you using a NAME BRAND class 10 card? Strongly suggest a SandDisk high speed card to see if that alleviates the problem. Make sure you don't have a counterfeit card. Rob Huntsville, AL Sent from my iPad using Tapatalk

My case doesn't allow for the props to be installed on the P3 and fit into the case. The blades are brittle and I suggest some type of protection, especially for the backup set that is not currently being flown. So far, the only blade I have broken was when the P3 slid out of my hand as I...

Basic, first question: Before you load the video file into Dahware, have you tried to watch the video file on this same computer? This will help prove that the video file is not corrupted and/or that your system has the codecs installed to actually view these files. I use the HealthyDrones...

I second the suggestion for DashWare. The ONLY drawback is that you have to manually synchronize the flight data to the video. In the future, for ease of use, you will want to make some abrupt direction changes to easily find synchronization points. Rob Huntsville, AL Sent from my iPad...

When in doubt, you can always use the RTH button on your remote, button below right stick.

Your best hope is that the connector for the compass has come loose.

The camera images and all your flight data is transmitted via the USB cable that connects your tablet/phone and controller. The data, via wifi or cellular, is used to update the GoogleMaps that are on your phone/tablet. Some like to turn off all data on their tablets. I run an android...

Sold locally. Mods may close

Greetings, came across a great deal on a used HDMI board for my P3P. My controller and P3P were previously updated to the latest current version of firmware P3P 1.9.6, Controller 1.6 Apparently, the board came from an Inspire controller. (if that makes a difference or has any bearing to this...