I programmed a Phantom 4 to fly waypoints around the farm while flying the Phantom 4 pro manually following. I had no issues, but your mind is in overdrive thinking ahead in case something goes wrong. I live out away from people so no risk of anyone getting hurt, just the drones if things went...
Thank You very much ianzone! I was tapping finish before calibrating, but calibrating before I saw finish. Thanks for taking time to help. Made my Day! Have a Great week!
I tried that and didn't work. I did Press the C1, C2 and video recording buttons at the same time. After you hear an alarm “D-DD”, press the camera settings dial, and the remote controller will start linking to your Phantom 4 Pro. Than press in the button on the drone and the drone starts...
I calibrate the joysticks and quits beeping with a solid lit red light, than fire up the drone and controller turns green and seems fine until you turn it off and turn everything on again, repeats the same issue. What do I need to do so I don't have to calibrate the joysticks every time to make...
In my area if they are below 400' there in trouble and going to make an emergency landing in which I would hear them long before they got near me, or it is a silent ufo.
It will stay at the height you programmed it to fly. You will need to add waypoints along the rising hill with higher waypoint heights along the hill until it clears. Otherwise it will stay the programmed path and using the joystick to to make it climb is of no use while in waypoint mode. I...
And another piece of advice. When it decides to RTH and it is set to a predetermined height like 200ft for example. No obstacle avoidance on the top, it will rise into whatever is above it. I hope DJI puts obstacle avoidance on top for that reason.
At 1400 ft. and wind strong enough to get a wind warning from DJI software. Before you say I shouldn't be flying that high, That was above a 1000 ft radio tower.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.