Recent content by Chebsy

Thank you all for your suggestions, I have finally got it worked out. crash1sttime you were right about the motors. I had got them all spinning in the right direction, just on the wrong corners !!! Schoolboy error on my part. Anyway now I can progress and get FPV installed and working.

I have just checked and all props spin as you describe and match up with the rotational diagrams on the top cover. I will have to have a look at the compass, although it is a new one and is mounted on the back right side. It came already fitted when I bought new landing gear. i have read that...

Ok, I have just worked through all of your suggestions, the Naza was connected correctly as per the image, all props spin as they should do. I have completed IMU calibration and it all went fine. The controller is in mode 2 with the left stick controlling the throttle. After doing all of this, I...

Thanks for your suggestions, I will work through them all starting with checking the Naza connection. I have gone through the advanced calibration twice using the DJI assistant software. Is the IMU calibration something else than this ? (I will google it) The controller is in the correct mode...

Hi Yes 2 CW and 2 CCW, the rotation is as it should be and all props self tighten.

Hi Yes 2 CW and 2 CCW, the rotation is as it should be and all props self tighten.

Hi all I have recently built a P2 Vision from parts into a new shell. I have used new 2312/960kv motors and new Brushless Part No.07 ESC's, a new original battery, the rest was more or less bought as used parts. I have gone through the calibration process a number of times as well as setting...