Recent content by BeepBeep

  1. B

    Please help

    Hello, That means your phantom does not see the remote control. You need to rebind the aircraft with your RC. Check RC battery are ok. See this
  2. B

    Lower Body Part for Phantom 1

    Hello, I can't view your picture. I got the following message: "You do not have permission to view this page or perform this action.". have I protected your files?
  3. B

    phantom 1.1.1 flashing yellow all time

    Have you rebound the remote control and the drone?
  4. B

    P1 software connection issues.

    Are you using a USB 3 or USB 2 port ? I have noticed several times that the DJI drivers do not work well on USB 3 ports.
  5. B

    Phantom 1 won’t fly

    If the remote control beeps continuously, check its batteries.
  6. B

    Phantom 1 Constantly flashes amber.

    Hello Billiam, Quick flashing amber means the drone don't see any RC. Try this: 1 - POWER ON your RC, check RC battery before :) 2 - POWER ON your drone, 3 - CONNECT your drone on a USB 2 PORT (not USB 3) on your PC, 4 - Assuming you are working on a Windows PC, check if COM port named: "DJI...
  7. B

    Dim Green Led - Won’t Connect to Assistant

    On Windows 10 try a USB 2 port not USB 3, Check your USB cable. Check a COM port with the name: " DJI USB Virtual COM" goes up when you plug your Phantom. If not, reinstall the DJI driver after you have authorized the installation of unsigned drivers. good luck.
  8. B

    Lower Body Part for Phantom 1

    2 years later! Do you still have this lower shell of P1?
  9. B

    Oof, I'm Stumped

    Hello Jackson, if you are using Windows connect the phantom to a USB 2 port, not a USB 3 port, because, sometimes it works, but sometimes it doesn't work!) I don't know why. Verify also the cable you are using, some cables supplied with chargers, the data signals are not wired. Also check with...
  10. B

    Why are my P1 no longer stable after 3 years of rest!

    Yes, of course, I did it! I wonder if you should not reload the default configuration settings after updating the firmware. What do you think?
  11. B

    Why are my P1 no longer stable after 3 years of rest!

    Hello, I just recover from the closet 3 Phantoms 1 (yes I know it's a bit old), I was very surprised to find that these drones seem not to obey the instructions of the GPS and have a rough stability. It's easier to pilot in ATTI mode than in GPS mode! In the past, 3 years ago, I flew without any...
  12. B

    Inside of remote control for P4Pro Plus

    The answer is: No, there was no desiccant bag inside the remote control.
  13. B

    Inside of remote control for P4Pro Plus

    @ Motorcycle-Man. it is not me who opened this remote, otherwise I would have paid attention to wiring and taken pictures. That said from the photo that was sent to me, the use/function of this connector is not obvious to me. Can you say a little more? Thank you.
  14. B

    Inside of remote control for P4Pro Plus

    Thank for your answers. @rexster314 I'll ask my friend who opened it if he found a desiccant bag.