Ok figured it out. I had to go to system setting on DX8 use mode 1. Now the only thing is I cannot control the gimbal. Does anyone know how to setup DX8 nob to control gimbal tilt while running through DJI Lightbridge? Thanks
Ok figured out the problem! On DX8 I originally used the channel numbers 1-8 in the order that I saw on the manual. I noticed in the PH2 assistant software that my sticks did not match the correct ones. So here is what I came up with to make it work:
DX8 Receiver SBE-1
T...
I tried this with DX8 and SBE-1 adaptor. All seems to be good except the motors don't spin fast enough even at full throttle to lift off. Any ideas? Thanks
IT'S FIXED! Ok the motor did need to be rewired but I did a dumb move also. :shock: I had accidentally swapped M1 and M2 inputs on the Naza! Thank you guys so much for your help!
I checked the props. They all are correct. I tried manual mode also and it still flips. Maybe the Naza controller is messed up?
On Naza M software on view menu under channel monitor:
U -796
X1 57
X2 797
that is in GPS mode on radio. Does that seem right?
Here is my update! I called the place I bought the parts from and they told me to switch the cables on the motor that spins backwards so it can spin the right direction. I did that and checked all propellers and motors spin the right way. But still the phantom flips over. Any ideas?
Ok so I just realized one of the motors is spinning backwards! I checked the connections and everything looks right. I did not take the naza out. I will try that next! Thanks
I did check the naza for x not + and originally it was set that way. I changed it. I will try again to see if if switched...
HI, I am new to the RC world. I bought my phantom about two months ago and practiced everyday. I got a little over confident at a pool party and tried to show off and the phantom ended up in the pool! :o A friend of mine that is into electronics told me to wash it with 70% alcohol so it does...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.