Recent content by aitch

  1. A

    Phantom 4 pro GPS error

    Good stuff!
  2. A

    Phantom 4 pro GPS error

    I have the tools to do the job so I changed it myself. You will definitely need a soldering iron and flux. There are 4 screws that hold the board in, 1 ribbon cable, 2 connectors for the compass, 1 connector for the GPS and 4 wires that need to be desoldered/soldered. If you're inclined and have...
  3. A

    Phantom 4 pro GPS error

    Speaking from my own experience I would start with the power module. Replacing the GPS module requires a complete tear down of the drone which isn't awful but it is time consuming. As for the compass I would just hold off until you've replaced one or both. IMO, it's very likely the compass is...
  4. A

    Phantom 4 pro GPS error

    Hi, I had this very same problem and it went on for months. I replaced my gps receiver and landing gear (compass) only to find out that none of it made a difference. Eventually I wound up replacing the power interface module (DJI Part #2). Both the GPS and the compass connect directly through...
See more