I am a new Litchi user. I have some experience using other similar apps.
I created a simple Waypoint mission: two points separate 18m
Mission settings
Heading: custom
Finish action: none
Straight lines
Cruising speed: 2.5Km/h
Default Gimbal Pitch mode: Interpolate
Point 1
Heading: 149º
Gimbal Pitch angle: -20º
Actions: Take photo
Point 2
Heading: 80º
Gimbal Pitch angle: -60º
Actions: Take photo
Photo #1 was taken in the right direction but Gimbal Pitch angle was 0º
Photo #2 was correct.
I repeated the mission (I have to load it again despite it was still on screen) but recording video before start.
Arriving to point #1 the camera took the position set, including the Gimbal Pitch angle and turned (smoothly, interpolation) to position and setting #2.
What am I missing to get the correct pitch angle at point #1?
I created a simple Waypoint mission: two points separate 18m
Mission settings
Heading: custom
Finish action: none
Straight lines
Cruising speed: 2.5Km/h
Default Gimbal Pitch mode: Interpolate
Point 1
Heading: 149º
Gimbal Pitch angle: -20º
Actions: Take photo
Point 2
Heading: 80º
Gimbal Pitch angle: -60º
Actions: Take photo
Photo #1 was taken in the right direction but Gimbal Pitch angle was 0º
Photo #2 was correct.
I repeated the mission (I have to load it again despite it was still on screen) but recording video before start.
Arriving to point #1 the camera took the position set, including the Gimbal Pitch angle and turned (smoothly, interpolation) to position and setting #2.
What am I missing to get the correct pitch angle at point #1?