Thanks for posting this info. Here's the Norwegian text GoogleTranslated into English (with link to software added):
**************Start Translation
Enabling X1 ( gimbal tilt) on DJI Phantom v1.1
Posted by : knutJ
Out of the box has DJI Phantom v1.1 x1 channel not activated.
(look behind the radio , under the model or on the box for the version number )
X1 is the channel that allows you to control the tilt of the gimbal / camera via the upper potentiometer behind the radio.
To activate the channel , follow this recipe ( important Naza -M Assistant Software and drivers are already installed) :
1. Download DJI Phantom RC Assistant here.
http://www.elefun.no/Uploads/docs/dji/P ... taller.zip
2. Start the program and login with the same email / username as the Naza -M Assistant

3. Open your radio (4 screws on the back) and connect a micro - usb cable as shown here.

4. Turn on the radio and you must have contact ( green light ).
5. Select the tab "info" and press the " Device Info " on the blue " Latest 2.4G ver. xxxxx "
Version The numbers shown in the pictures below is already updated radio - so the numbers will be slightly different on your radio.

6. Complete the upgrade and disconnect everything from .

7. Run Naza -M Assistant Software and calibrate both sticks and x1/x2 normally.
**************End Translation
Steve
blunde said:
http://blogg.elefun.no/?p=4499
Use Google translate If you don't understand Norwegian