I cant quite get my head around this one.
Issue: GL300B with no Go 4 app or Go App comms via the USB port
Tried the app and the cable in another GL300C and all works fine so i know the device and cable are good.
Tried a good working usb module and ribbon cable - Same issue
Tried all the button toggles for reset and blue led trigger - Same issue
Read on the forums a multitude of others with the same issue and no apparent fix
Now the strange , very strage part
I replaced the standard GL300B USB module with Inspire (GL658) USB and HDMI modules I had just as a try - It worked immediatly
The controller connects to Go4 and reports firmware 1.9.2, its now connected to my test P4 and fully functional
If I put the original USB module back into the GL300B I get no device connection, but strangly i get a flashing green led showing firmware mismatch, if i put the same module in my GL300C it works fine
I know on the GL658 you can get a corupt HDMI module which will stop the USB port from working, so my thoughts might be a hardware failure on the main controller motherboard which is now relying on the Inspire modules to do the decoding
Any ideas why
Issue: GL300B with no Go 4 app or Go App comms via the USB port
Tried the app and the cable in another GL300C and all works fine so i know the device and cable are good.
Tried a good working usb module and ribbon cable - Same issue
Tried all the button toggles for reset and blue led trigger - Same issue
Read on the forums a multitude of others with the same issue and no apparent fix
Now the strange , very strage part
I replaced the standard GL300B USB module with Inspire (GL658) USB and HDMI modules I had just as a try - It worked immediatly
The controller connects to Go4 and reports firmware 1.9.2, its now connected to my test P4 and fully functional
If I put the original USB module back into the GL300B I get no device connection, but strangly i get a flashing green led showing firmware mismatch, if i put the same module in my GL300C it works fine
I know on the GL658 you can get a corupt HDMI module which will stop the USB port from working, so my thoughts might be a hardware failure on the main controller motherboard which is now relying on the Inspire modules to do the decoding
Any ideas why