I had a crash that broke a ribbon cable on my H3-2D so I now have an H3-D3 gimbal on my P2. The gain seems to be to high on the pitch and I can't move it nearly as slow as I would like. Has anyone figured out how to set the X1 up so you can make a smooth transition from horizon view to pointing straight down?
X1 pitch calibration for Zenmuse gimbals - P2
- Thread starter Bluegrass
- Start date
Set the Gimbal gain to 1 or 2.
Make sure you have re-calibrated both the controller and Phantom using the RC & Phantom Assistant software respectively. Do the controller first, then the Phantom.
Make sure you have re-calibrated both the controller and Phantom using the RC & Phantom Assistant software respectively. Do the controller first, then the Phantom.
Similar threads
