I took my P2V apart earlier today and painted the case. Upon reinstall I thought I had everything reinstalled correctly. Drone powers up with battery turn on sequence, but motors will not turn on whenever I hold the joystick controls in angled position. Not sure if the flight controller is miswired or what could be the issue. All the batteries are charged.
Will not power up
- Thread starter txagemtp
- Start date
Hello,
can you explain EXACTLY what it is doing when started up.
Example
Turn it on, then beep-beep-beep-beep, the slow yellow flashes, ect...
We need to know light sequences they tell a lot.
Like if your getting fast yellow blinks, you'll need to rebind Tx to bird? Ect.
I have these for you to cross reference yours to.
P2v wiring:
Hope this helps
J Dot
can you explain EXACTLY what it is doing when started up.
Example
Turn it on, then beep-beep-beep-beep, the slow yellow flashes, ect...
We need to know light sequences they tell a lot.
Like if your getting fast yellow blinks, you'll need to rebind Tx to bird? Ect.
I have these for you to cross reference yours to.
P2v wiring:
Hope this helps
J Dot
Thanks for the photos J Dot, had 1a/1b and 2a/2b backwards. After a day of replacing parts from a crash and new case. Test flight was 100% operational and landed safely. Will test it more tomorrow during the daylight hours.
Similar threads
