Whats the difference between mode 1 and 2 on controller?

[ccase39]

And how do I set home lock, course lock and RTH?

 

[1st_time_flyer]

And how do I set home lock, course lock and RTH?

by reading the DJI manual......

 

[N017RW]

And how do I set home lock, course lock and RTH?

R/C control modes:
http://www.rc-airplane-world.com/rc-tra ... -modes.htm

 

[RCRookie]

Mode 1 reverses the control setup...So the left stick is Fwd/Aft and the right stick is Up/down. Reverse of what American Tx's are set to.

http://www.rc-airplane-world.com/rc-helicopter-transmitter-modes.html

You can enable "Naza" in the assistant software. Its advisable to watch some videos on Course lock and Home lock functions before trying to use them.

 

[ccase39]

Ok so Ill do mode 2 as that is what ive trained on. Im in the process of checking out videos. I am going to hook it up and update it and do my settings tonight.

 

[ccase39]

And how do I set home lock, course lock and RTH?

by reading the DJI manual......

Ive read over the manual and I saw nothing of setting RTH or home lock. Didnt say anything about how to actually use these features either. It did say that if I needed to take control of the Phantom to switch to position 2 or three on the toggle switches. It didnt say anything about which position does what either except that position 1 was GPS mode.

 

[RCRookie]

Here is s a video showing the process of enabling NAZA mode:
http://m.youtube.com/watch?v=IK--MQDWb-s

Here is a video of Courselock and Homelock being demonstrated.
http://m.youtube.com/watch?v=96oQ74Tq95w

Courselock and homelock are not availble in Phantom Vision mode, you must enable NAZA mode to be able to change/set the functions of S2 switch.

The S1 Switch can be set to GPS/ATTI/MANUAL (manual mode is dangerously fast and responsive)
Most prefer to set S1 to... ... GPS/ATTI/RTH