I purchased a standard dji phantom 3 controller but my dji go application detects it as SE
Welcome to the forum.I purchased a standard dji phantom 3 controller but my dji go application detects it as SE
View attachment 112982
Welcome to the forum.
Just to start with the basics since you said that you just bought an RC. What is the model of your new RC? Look on back if you are not sure.
A GL358wA is for the P3S and a GL358wD is for a P3-SE.
Is your Wi-Fi set up and on,once remote and drone on it should connect with your Wi-Fi on device?..do you get any options like in these pics.....see how it grey colour,,it be blue when cam connects with wifiThanks for the welcome
I looked behind the controller and there is model: GL358wA
I don't understand how it is possible
There are no Phantom SE dji options only. Did they install a firmware for SE? it's possible?Is your Wi-Fi set up and on,once remote and drone on it should connect with your Wi-Fi on device?..do you get any options like in these pics.....see how it grey colour,,it be blue when cam connects with wifiView attachment 113131View attachment 113132
It appears and connects to the remote control but does not allow me to associate it with the droneAlso your Wi-Fi on remote,,,this should come up in your WiFi settings,,you might have to press connect when it displays for it to connect with phantomView attachment 113135
Red on both the controller and the drone. only those of the controller battery are green.Are green lights on remote and is drone link button underneath green or red
Ok even though app not conectedopen it and top right of screen takes you to general settings,your looking for rc linking,when find click on and dronewill beep and that link light will flash until you press it with pin or pen,,it's a click button so no force to press it,hold for 2 sec and beeping should stop and light go green,,I get pics if you can't follow meRed on both the controller and the drone. only those of the controller battery are green.
Only the smart phone connects to the controller but the controller to the drone does not
I tried but it does not work the LED continues to flash red and the application tells me: Remote controller linking Time OutIt appears and connects to the remote control but does not allow me to associate it with the drone
Ok try this manual methodI tried but it does not work the LED continues to flash red and the application tells me: Remote controller linking Time Out
I thank you for helping me but unfortunately it does not work for me it is really a controller problem. In my opinion the old owner must have modified it by forcing the firmware.Ok try this manual methodView attachment 113142
Ok um ,,on your home screen you got those 3 black lines up top right,,press and hold with remote and drone on and some roll back options might show,you might get previous version here,,maybe you could contact and askI thank you for helping me but unfortunately it does not work for me it is really a controller problem. In my opinion the old owner must have modified it by forcing the firmware.
thank you
ok done and that's what i seeOk um ,,on your home screen you got those 3 black lines up top right,,press and hold with remote and drone on and some roll back options might show,you might get previous version here,,maybe you could contact and ask