propeller balancing

[billup]

another question, Ive been looking at propeller balancing equipment, dubro and ocday a little confused on which one will work with p4p propellers. I know it needs to have a 3mm rod, but on which unit and model I need I cant figure out. I'm still pretty new to this and from reading the forum Ive learned a lot from you all. thanks for any information you can give me.

 

[RémyHeli]

Have you read this thread already?

Phantom 4 Prop Balance Inconsistency

 

[billup]

Thanks just did sounds like there might be an operation issue, from posts confirmed the 3mm rod. Thanks

 

[msinger]

Ive been looking at propeller balancing equipment, dubro and ocday a little confused on which one will work with p4p propellers

I have a list of commonly used prop balancers and rods here.

 

[jogforfitness]

Thanks just did sounds like there might be an operation issue, from posts confirmed the 3mm rod. Thanks

Good luck. I gave up trying.

 

[billup]

Thanks guys, I'm going to give it a try, we'll see what happens

 

[wa5tef]

I first used a a mechanical pencil that fit the hole in the hub. It worked perfectly. All DJI props I had were perfectly balanced. A set of carbon fiber ones were OOB with half of them out. I then ordered a ??? brand and repeated the tests with identical results. In short if you use real DJI props you don't need to check them!

Jim
WA5TEF

 

[billup]

thanks