P3S Downgraded and Barometer error with all BIN downgrades...

[larrylove]

I have tried everything for HOURS. I think I have been beeped to death. I have tried all downgrades and all of them give me a barometer error. all the downgrades were succesful but just no luck getting passed the barometer error. It seems like if you upgraded to 1.8, soon as you downgrade it that it just throws errors. I can take it back to 1.8 and it works fine. Driving me crazy. HA

[00014397]========== remo-con disconnect. boot(15) ============
[00014463]Packet [C:\P3C_FW_V01.06.0080.bin] detected, card sn [0xe9a72476].
[00014524]Packet upgrade start...

[00014598]Packet checking...
[00014660]Packet vlink 01.06.0080 <-> 01.05.0070.
[00014748]Record vlink 01.07.0094 <-> 01.06.0080 (flow = 1).
[00014811]Done.

[00014874]Version checking[1]...
[00014960][04 00][00] v1.51.0.0 -> v1.44.0.0
[00015120][11 00][00] v0.0.0.0 -> v1.8.0.0, firmware v0.0.0.0 not support.
[00015185][11 00][00] v0.0.0.0 -> v1.8.0.0
[00015321][11 01][00] v0.0.0.0 -> v2.0.0.32 need upgrade.
[00015387][01 00][00] v1.14.4920 -> v1.14.4920
[00015456][01 01][00] v1.14.4920 -> v1.14.4920
[00015559][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015678][03 06][00] v2.4.20.22 -> v2.4.15.5 need upgrade.
[00015799][07 00][00] v1.0.9.62 -> v1.0.9.56 need upgrade.
[00015876][09 00][00] v0.1.1.0 -> v0.1.1.0
[00016024][12 00][00] v5.9.0.0 -> v5.9.0.0
[00016160][12 01][00] v5.9.0.0 -> v5.9.0.0
[00016325][12 02][00] v5.9.0.0 -> v5.9.0.0
[00016456][12 03][00] v5.9.0.0 -> v5.9.0.0
[00016519]Done.

[00018588]Waiting for user confirm...
[00028653]Timeout, start upgrade automatically.

[00028791]Firmware upgrading[1]...
[00030288][07 00] Firmware upgrade start...
[00121458][07 00] Firmware upgrade finish without reboot.
[00161686][07 00] Firmware upgrade finished successfully.
[00161763][11 01] Firmware upgrade start...
[00220048][11 01] Firmware upgrade finished successfully.
[00220333][03 06] Firmware upgrade start...
[00581614][03 06] Firmware upgrade finished successfully.
[00581683]Done.

[00581747]Version checking[2]...
[00581820][04 00][00] v1.51.0.0 -> v1.44.0.0
[00581939][11 00][00] v2.0.0.32 -> v1.8.0.0, firmware v2.0.0.32 not support.
[00582000][11 00][00] v2.0.0.32 -> v1.8.0.0
[00582145][11 01][05] v2.0.0.32 -> v2.0.0.32
[00582208][01 00][00] v1.14.4920 -> v1.14.4920
[00582264][01 01][00] v1.14.4920 -> v1.14.4920
[00582379][03 05][00] v34.2.0.9 -> v34.2.0.9
[00582498][03 06][05] v2.4.15.5 -> v2.4.15.5
[00582613][07 00][05] v1.0.9.56 -> v1.0.9.56
[00582707][09 00][00] v0.1.1.0 -> v0.1.1.0
[00582831][12 00][00] v5.9.0.0 -> v5.9.0.0
[00582935][12 01][00] v5.9.0.0 -> v5.9.0.0
[00583047][12 02][00] v5.9.0.0 -> v5.9.0.0
[00583146][12 03][00] v5.9.0.0 -> v5.9.0.0
[00583207]Packet upgrade finish successfully.

 

[J Dot]

Research firMware ENCRYPTION ( pre and post )!
This might help you on your way to an answer!


J Dot

 

[KennethMcNutt]

I have fixed the error in 1.7.9.. I am still working on the fix to get the same "fix" for 1.5.7 because you get the error again after further downgrade.... But the 1.7.9 fix is 100% working
http://www.phantompilots.com/threads/1-7-9-downgrade-sensor-error-fixed.112760/