The last couple times I have been flying, I have briefly received an "invalid battery" message. Today when I was reviewing my flight tracker, I was able to identify when it happened. You can see in the pictures when the amperage drops to 0 and then the battery % jumps to 255. The warning appeared for a second and then went away. I am looking for any advice on what I should do.
Invalid battery issue... Need advice
- Thread starter Cobracones
- Start date
- Joined
- Jan 29, 2015
- Messages
- 341
- Reaction score
- 77
Hi,
Make sure the small contacts in both the Phantom and the battery are clean. Those are where the data comes from. Use a pencil eraser to clean the battery contacts but make sure to remove all the rubber debris when you finish. Other than that I don't have any other ideas. I have had the same issue using a Flytrex Live 3G, others have too. Might just be a glitch according to Flytrex, they are working on a fix.
You might contact your Flight tracker support and see if they have any ideas.
Good luck
Make sure the small contacts in both the Phantom and the battery are clean. Those are where the data comes from. Use a pencil eraser to clean the battery contacts but make sure to remove all the rubber debris when you finish. Other than that I don't have any other ideas. I have had the same issue using a Flytrex Live 3G, others have too. Might just be a glitch according to Flytrex, they are working on a fix.
You might contact your Flight tracker support and see if they have any ideas.
Good luck
Thanks for the ideas. I have tried cleaning the contacts with no luck. I use FPV Booster and I contacted them. They told me if it is showing up on their app, then that is the message being produced by the DJI SDK.
- Joined
- Mar 3, 2015
- Messages
- 735
- Reaction score
- 295
Similar threads
