I have a few questions about RTH

[brico79]

Hi

First, sorry for my bad english, i'm french !

I have buy a phantom 3 standard and it work perfectly. But i've try to go away (i've set my home point, compass ok..) and my phantom go up to 470m and i lost signal with a grey screen and all statut is "N/A" and disconnected. My phantom stay away and don't come back ! i press RTH many time but always "failed' He come back after 5 min with critical low battery.

Today i do the same test and trying to always see my drone and i've understand ! i lost signal and image and rth failed but i can always move the drone with the controller.

So :

I need to go more away for lost control (not only image) and phantom will rth ?

Is there a setting to active the RTH when you lose the image ? (i don't find it)

It's a good idea to turn off the controller for simulate a lost control for automatic going in rth mode and turn on when we have range ?

Thanks for your help and sorry again for this horrible english !

 

[msinger]

Is there a setting to active the RTH when you lose the image ?

If the remote controller is still connected to the Phantom, you can manually initiate RTH by toggling the S2 switch back and forth at least twice.

Check out the Phantom manual for more information on the RTH feature.